ShowMagic AV, Руководство пользователя, Страница: 27 / 233

3) Double-click on the address values
(currently shown in grey as 000 - 000 ) in
the top right window under the title
DMX
Address
and an
Enter DMX Address (Copy)
dialogue box will appear.
4) Type the value 50 into the
Address
box to
enter a start address of
050
for that
fixture. If you wanted to assign another 3
par cans to the consecutive faders
010 ,
011 & 012, and patch them at
consecutive DMX addresses
'Enter DMX Address (Copy)' dialogue box
051
,
052
&
053
, then additionally, type
3
in the
Copy
box before clicking on the
Enter
button. 4 par cans will then be automatically assigned to fixture faders
009
through
012
and
they will be automatically patched to DMX addresses 050 to 053 .
5) Highlight
Fdr
013 in the list by either clicking on it or using the [Down] cursor key. Then
using the
Library
button select:
Make
Clay Paky
Model
GoldenScan HPE
. The label
GoldenScan HPE
will then appear under the
Label
title and
Scanner
will appear under the
Fixture Type
title. The 12 functions of the GoldenScan HPE will also appear automatically in
the Function list.
6) Double-click on the DMX address for that fixture and an
Enter DMX Address (Copy)
dialogue
box will appear. Type a start address of
55
in the
Address
box and click on
Enter
button.
That fixture will then be patched to DMX addresses 055 - 066 as it is a multi-channel
fixture that uses 12 DMX channels.
Clearing an Address
To delete a DMX address for a fixture do the above but enter 0 for the new address. This will clear
the address back to
000 - 000.
Fader List
The Fader list display shows the following information for each of the fixture faders:
Fdr
-
The ‘fixture fader’ number is shown under this title. The number for the first fixture fader on
each page of fixtures on the fixture panel on the main desk is highlighted in white.
Fixs
-
The number of fixtures assigned to that fader is shown under this title. Up to 24 individual
fixtures (or banks of fixtures if they share the same DMX channels) can be patched to a single
fixture fader, but they must be of the same generic type (par cans, fresnels, etc) or the same make
and model for multi-channel fixtures.
Section 3 - Patch Screen
15