ShowMagic AV Скачать руководство пользователя страница 120 | Manualshive

Страница: 120 / 233

ShowMagic AV Скачать руководство пользователя страница 120

3) Whilst holding down the

[Ctrl]

key, tap

[Spacebar]

in time to the BPM you are logging.

After every four taps of the

[Spacebar]

ShowMagic will display the BPM setting. The

displayed BPM value can then be used as a reference when setting the BPM for the chase on
the sequence panel.

Deleting a Sound Event

To delete a sound event, click on the button and press

[Delete]

. You will be prompted to confirm or

cancel. If the sound event is used in any sequences you will be informed of this, and if you confirm
the deletion it will be removed from all sequences that contain it.

Copying a Sound Event

To copy a sound event, drag the button, or its label from the details display, onto the button that you
wish to copy it to; dropping the sound event elsewhere (e.g. back onto the same button or back into
the display) will cancel the operation. If the sound events are on different pages then select two
sound event panels on the desk (one on the left and the other on the right) and copy from one to the
other. If the sound event button you are copying to already has a sound event stored in it, you will
be prompted to confirm or cancel the overwrite.

Moving a Sound Event

To move a sound event from one button to another, drag the button onto another empty sound event
button and hold down

[Ctrl]

before dropping it. If the original sound event button is used in any

sequences, those sequences will be updated with the new sound event button number.

Using ASIO Drivers and Multiple Input / Output Soundcards

- ASIO Technology by Steinberg Media Technologies GmbH

ShowMagic includes ASIO driver support for multiple input / output soundcards such as the M-
Audio Delta series.

You can play up to 16 synchronized .wav sound events out to channels 1 to 16 for multi-track,
backing track, or ‘DIY’ surround sound type applications.

You can also route any of the inputs to any of the outputs as well as playing multiple .wav sound
events on up to 32 independent channels for audio ‘zoning’ applications. Here are some examples:

108

ShowMagic SLX Series User Manual

«
...
118
119
120
121
122
...
»

Содержание AV










































































































































































































































Отзывы:

Нет отзывов