ShowMagic AV Скачать руководство пользователя страница 67 | Manualshive

Страница: 67 / 233

ShowMagic AV Скачать руководство пользователя страница 67

Record Button - The Different Recording Modes

The record
button

This button is used to record the settings of selected fixture function faders
to a selected scene event button. There are different recording modes
available for the lighting scene record button.
These various recording modes are selected by right-clicking on the record
button and selecting one of the following from the pop-up menu:

Rec M

Short for

Rec

ord

M

oved - the default mode. When set to this recording mode, all faders that are in a

Cued

or physically

Moved

state are recorded to a scene when the record button is used.

Rec T

This is short for

Rec

ord

T

agged. When set to this recording mode the background color of the

function buttons in the centre of the fixture panel default to blue. Right-clicking on a function’s
button on the fixture panel will toggle that button between blue and red.

The state of any functions, for any fixture (or group of fixtures) that have been ‘tagged’ in red will
be recorded to a scene when the record button is used (set to

Rec T

) - even if they are at

000

. The

only exception to this is if a tagged function fader has been

Locked

either manually, or by running a

Safe

scene (see "Scene Details Display", p.60).

All other un-tagged functions are not recorded - even if they have been moved manually or have
been moved by a currently running lighting scene (

Cued

state).

If you hold down

[Ctrl]

whilst double-clicking on the scene panel’s clear button (labelled as

Clr Y

or

Clr N

), then the desk is cleared down as normal, but all tagged function buttons are also un-tagged

as well.

Rec F

This is short for

Rec

ord

F

ixture. When set to this, the state of ALL the function faders for a selected

fixture (or group of fixtures) - even if they are at

000

- are recorded to a scene.

This recording setting is most commonly used with the

Live

operating mode whereby, when the

scene is run, you know that ALL the function faders will go to the settings recorded in that scene
irrespective of what scenes (that might be using some of those functions) were run beforehand.

Rec S

This is short for

Rec

ord by ‘

S

niffing’ DMX. When set to this recording mode, the values of all the

DMX channels of any selected fixture (or group of fixtures) is ‘sniffed’ from the incoming DMX
input and recorded to the scene when the record button is used. This is useful if you already have
lots of lighting scenes already programmed in an external lighting desk and want to transfer those
scenes onto ShowMagic lighting scene buttons. For more detailed instructions on creating scenes
using this recording mode, see "Recording Scenes by ‘Sniffing’ DMX", p.68.

Section 7 - Lighting Scene Panel

55

«
...
65
66
67
68
69
...
»

Содержание AV










































































































































































































































Отзывы:

Нет отзывов