-17-
Model W1855 (For Machines Mfd. Since 6/17)
SE
TU
P
Figure.13.
Removing switch key from
toggle switch.
Test.Run
Serious. injury. or. death. can. result.
from. using. this. machine. BEFORE.
understanding. its. controls. and. related.
safety.information..DO.NOT.operate,.or.
allow.others.to.operate,.machine.until.
the.information.is.understood..
DO. NOT. start. machine. until. all.
preceding.setup.instructions.have.been.
performed..Operating.an.improperly.set.
up. machine. may. result. in. malfunction.
or. unexpected. results. that. can. lead.
to. serious. injury,. death,. or. machine/
property.damage.
Once assembly is complete, test run the machine to
ensure it is properly connected to power and safety
components are functioning properly.
If you find an unusual problem during the test run,
immediately stop the machine, disconnect it from power,
and fix the problem BEFORE operating the machine again.
The
Troubleshooting
table in the
SERVICE
section of this
manual can help.
To.test.run.machine,.do.these.steps:
1.
Clear all setup tools away from machine.
2.
Connect machine to power supply.
3.
Turn machine
ON
, verify motor operation, and then
turn machine
OFF
.
The motor should run smoothly and without unusual
noises.
4.
Remove locking key from toggle switch (see
example).
5.
Try to start machine with switch.
Machine should NOT start. If it
does
start, switch
disabling feature is not functioning properly and
switch must be replaced.
