-37-
Model W1855 (For Machines Mfd. Since 6/17)
PA
RT
S
Labels.&.Cosmetics
Safety.labels.warn.about.machine.hazards.and.how.to.prevent.serious.personal.injury..The.owner.
of.this.machine.MUST.maintain.the.original.location.and.readability.of.all.labels.on.this.machine..
If.any.label.is.removed.or.becomes.unreadable,.REPLACE.that.label.before.allowing.machine.to.
be.operated.again..Contact.us.at.
(
360
)
.734-3482.or.www.woodstockint.com.to.order.new.labels..
W1855 Machine Labels
(07/28/17)
• 1:1 Sizing (Labels are
actual size)
• Labels must be made of
chemical-resistant material
BELT DIRECTION
DISC DIRECTION
MODEL W1855
4" x 36" HORIZONTAL/VERTICAL
BELT SANDER w/6"DISC
Motor: 1/2 HP, 120V,
1-Ph, 60 Hz, 4.3A
Motor Speed: 3600 RPM
Belt Size: 4" x 36"
Belt Speed: 1900 FPM
Belt Tilt: 90°
Disc Type: 6" PSA
Disc Speed: 3600 RPM
Disc Table Tilt: 0° – 45°
Weight: 38 lbs.
Specifications
To reduce risk of serious injury while using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved eye protection and respirator.
3. Only plug power cord into a grounded outlet.
4. Support workpiece with miter gauge, backstop, or
worktable.
5. Maintain 1/16" maximum clearance between table and
sandpaper.
6. Never touch moving sandpaper.
7. Always sand according to directional arrows on machine.
8. Make sure sander is properly assembled, adjusted, and
stable before operating. Only operate with all guards in
place.
9. Never sand pointed stock with point facing into sanding
rotation, and never force workpiece into sanding surface.
10. Only remove jammed pieces when machine is stopped.
11. Turn motor OFF and disconnect power before changing
sandpaper, making adjustments, or servicing.
12. Do not wear loose clothing, gloves, jewelry, or other
articles that can get entangled. Tie back long hair, roll up
sleeves.
13. Never reach over moving sanding belt or disc.
14. Do not expose to rain or use in damp locations.
15. Do not operate under influence of drugs or alcohol, or
when tired.
16. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
Mfd. for Woodstock in China
Date
S/N
WARNING!
PANTONE 151 C or RAL 2005
WARNING
CAUTION
PANTONE 109 C
COLOR CODES
READ and UNDERSTAND
MANUAL to avoid serious
injury! If a manual is not
available, DO NOT use
machine! Instead, go to
www.woodstockint.com
or call (360) 734-3482.
WARNING!
WARNING!
EYE/LUNG INJURY
HAZARD!
Always wear safety
glasses and a
respirator when
using this machine.
WARNING
ACCIDENTAL INJURY
HAZARD!
Disconnect power
supply before
adjustments, setup
or maintenance!
SF LOGO RED
PANTONE 1795C
COPYRIGHT © WOODSTOCK INTERNATIONAL, INC.
FOR SHOP FOX MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Woodstock will not accept labels changed without
approval.
If artwork changes are required, contact us immediately at
W1855 Machine Labels
(07/28/17)
• 1:1 Sizing (Labels are
actual size)
• Labels must be made of
chemical-resistant material
BELT DIRECTION
DISC DIRECTION
MODEL W1855
4" x 36" HORIZONTAL/VERTICAL
BELT SANDER w/6"DISC
Motor: 1/2 HP, 120V,
1-Ph, 60 Hz, 4.3A
Motor Speed: 3600 RPM
Belt Size: 4" x 36"
Belt Speed: 1900 FPM
Belt Tilt: 90°
Disc Type: 6" PSA
Disc Speed: 3600 RPM
Disc Table Tilt: 0° – 45°
Weight: 38 lbs.
Specifications
To reduce risk of serious injury while using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved eye protection and respirator.
3. Only plug power cord into a grounded outlet.
4. Support workpiece with miter gauge, backstop, or
worktable.
5. Maintain 1/16" maximum clearance between table and
sandpaper.
6. Never touch moving sandpaper.
7. Always sand according to directional arrows on machine.
8. Make sure sander is properly assembled, adjusted, and
stable before operating. Only operate with all guards in
place.
9. Never sand pointed stock with point facing into sanding
rotation, and never force workpiece into sanding surface.
10. Only remove jammed pieces when machine is stopped.
11. Turn motor OFF and disconnect power before changing
sandpaper, making adjustments, or servicing.
12. Do not wear loose clothing, gloves, jewelry, or other
articles that can get entangled. Tie back long hair, roll up
sleeves.
13. Never reach over moving sanding belt or disc.
14. Do not expose to rain or use in damp locations.
15. Do not operate under influence of drugs or alcohol, or
when tired.
16. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
Mfd. for Woodstock in China
Date
S/N
WARNING!
PANTONE 151 C or RAL 2005
WARNING
CAUTION
PANTONE 109 C
COLOR CODES
READ and UNDERSTAND
MANUAL to avoid serious
injury! If a manual is not
available, DO NOT use
machine! Instead, go to
www.woodstockint.com
or call (360) 734-3482.
WARNING!
WARNING!
EYE/LUNG INJURY
HAZARD!
Always wear safety
glasses and a
respirator when
using this machine.
WARNING
ACCIDENTAL INJURY
HAZARD!
Disconnect power
supply before
adjustments, setup
or maintenance!
SF LOGO RED
PANTONE 1795C
COPYRIGHT © WOODSTOCK INTERNATIONAL, INC.
FOR SHOP FOX MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Woodstock will not accept labels changed without
approval.
If artwork changes are required, contact us immediately at
REF PART #
DESCRIPTION
REF PART #
DESCRIPTION
93
X1855093
READ MANUAL LABEL
97
X1855097
ELECTRICITY LABEL
94
X1855094
BELT/DISC ROTATION LABEL
98
X1855098
DISCONNECT 120V LABEL
95
X1855095
MACHINE ID LABEL
99
X1855099
SHOP FOX WHITE TOUCH-UP PAINT
96
X1855096
EYE/LUNG INJURY HAZARD LABEL
W1855 Machine Labels
(07/28/17)
• 1:1 Sizing (Labels are
actual size)
• Labels must be made of
chemical-resistant material
BELT DIRECTION
DISC DIRECTION
MODEL W1855
4" x 36" HORIZONTAL/VERTICAL
BELT SANDER w/6"DISC
Motor: 1/2 HP, 120V,
1-Ph, 60 Hz, 4.3A
Motor Speed: 3600 RPM
Belt Size: 4" x 36"
Belt Speed: 1900 FPM
Belt Tilt: 90°
Disc Type: 6" PSA
Disc Speed: 3600 RPM
Disc Table Tilt: 0° – 45°
Weight: 38 lbs.
Specifications
To reduce risk of serious injury while using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved eye protection and respirator.
3. Only plug power cord into a grounded outlet.
4. Support workpiece with miter gauge, backstop, or
worktable.
5. Maintain 1/16" maximum clearance between table and
sandpaper.
6. Never touch moving sandpaper.
7. Always sand according to directional arrows on machine.
8. Make sure sander is properly assembled, adjusted, and
stable before operating. Only operate with all guards in
place.
9. Never sand pointed stock with point facing into sanding
rotation, and never force workpiece into sanding surface.
10. Only remove jammed pieces when machine is stopped.
11. Turn motor OFF and disconnect power before changing
sandpaper, making adjustments, or servicing.
12. Do not wear loose clothing, gloves, jewelry, or other
articles that can get entangled. Tie back long hair, roll up
sleeves.
13. Never reach over moving sanding belt or disc.
14. Do not expose to rain or use in damp locations.
15. Do not operate under influence of drugs or alcohol, or
when tired.
16. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
Mfd. for Woodstock in China
Date
S/N
WARNING!
PANTONE 151 C or RAL 2005
WARNING
CAUTION
PANTONE 109 C
COLOR CODES
READ and UNDERSTAND
MANUAL to avoid serious
injury! If a manual is not
available, DO NOT use
machine! Instead, go to
www.woodstockint.com
or call (360) 734-3482.
WARNING!
WARNING!
EYE/LUNG INJURY
HAZARD!
Always wear safety
glasses and a
respirator when
using this machine.
WARNING
ACCIDENTAL INJURY
HAZARD!
Disconnect power
supply before
adjustments, setup
or maintenance!
SF LOGO RED
PANTONE 1795C
COPYRIGHT © WOODSTOCK INTERNATIONAL, INC.
FOR SHOP FOX MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Woodstock will not accept labels changed without
approval.
If artwork changes are required, contact us immediately at
W1855 Machine Labels
(07/28/17)
• 1:1 Sizing (Labels are
actual size)
• Labels must be made of
chemical-resistant material
BELT DIRECTION
DISC DIRECTION
MODEL W1855
4" x 36" HORIZONTAL/VERTICAL
BELT SANDER w/6"DISC
Motor: 1/2 HP, 120V,
1-Ph, 60 Hz, 4.3A
Motor Speed: 3600 RPM
Belt Size: 4" x 36"
Belt Speed: 1900 FPM
Belt Tilt: 90°
Disc Type: 6" PSA
Disc Speed: 3600 RPM
Disc Table Tilt: 0° – 45°
Weight: 38 lbs.
Specifications
To reduce risk of serious injury while using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved eye protection and respirator.
3. Only plug power cord into a grounded outlet.
4. Support workpiece with miter gauge, backstop, or
worktable.
5. Maintain 1/16" maximum clearance between table and
sandpaper.
6. Never touch moving sandpaper.
7. Always sand according to directional arrows on machine.
8. Make sure sander is properly assembled, adjusted, and
stable before operating. Only operate with all guards in
place.
9. Never sand pointed stock with point facing into sanding
rotation, and never force workpiece into sanding surface.
10. Only remove jammed pieces when machine is stopped.
11. Turn motor OFF and disconnect power before changing
sandpaper, making adjustments, or servicing.
12. Do not wear loose clothing, gloves, jewelry, or other
articles that can get entangled. Tie back long hair, roll up
sleeves.
13. Never reach over moving sanding belt or disc.
14. Do not expose to rain or use in damp locations.
15. Do not operate under influence of drugs or alcohol, or
when tired.
16. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
Mfd. for Woodstock in China
Date
S/N
WARNING!
PANTONE 151 C or RAL 2005
WARNING
CAUTION
PANTONE 109 C
COLOR CODES
READ and UNDERSTAND
MANUAL to avoid serious
injury! If a manual is not
available, DO NOT use
machine! Instead, go to
www.woodstockint.com
or call (360) 734-3482.
WARNING!
WARNING!
EYE/LUNG INJURY
HAZARD!
Always wear safety
glasses and a
respirator when
using this machine.
WARNING
ACCIDENTAL INJURY
HAZARD!
Disconnect power
supply before
adjustments, setup
or maintenance!
SF LOGO RED
PANTONE 1795C
COPYRIGHT © WOODSTOCK INTERNATIONAL, INC.
FOR SHOP FOX MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Woodstock will not accept labels changed without
approval.
If artwork changes are required, contact us immediately at
W1855 Machine Labels
(07/28/17)
• 1:1 Sizing (Labels are
actual size)
• Labels must be made of
chemical-resistant material
BELT DIRECTION
DISC DIRECTION
MODEL W1855
4" x 36" HORIZONTAL/VERTICAL
BELT SANDER w/6"DISC
Motor: 1/2 HP, 120V,
1-Ph, 60 Hz, 4.3A
Motor Speed: 3600 RPM
Belt Size: 4" x 36"
Belt Speed: 1900 FPM
Belt Tilt: 90°
Disc Type: 6" PSA
Disc Speed: 3600 RPM
Disc Table Tilt: 0° – 45°
Weight: 38 lbs.
Specifications
To reduce risk of serious injury while using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved eye protection and respirator.
3. Only plug power cord into a grounded outlet.
4. Support workpiece with miter gauge, backstop, or
worktable.
5. Maintain 1/16" maximum clearance between table and
sandpaper.
6. Never touch moving sandpaper.
7. Always sand according to directional arrows on machine.
8. Make sure sander is properly assembled, adjusted, and
stable before operating. Only operate with all guards in
place.
9. Never sand pointed stock with point facing into sanding
rotation, and never force workpiece into sanding surface.
10. Only remove jammed pieces when machine is stopped.
11. Turn motor OFF and disconnect power before changing
sandpaper, making adjustments, or servicing.
12. Do not wear loose clothing, gloves, jewelry, or other
articles that can get entangled. Tie back long hair, roll up
sleeves.
13. Never reach over moving sanding belt or disc.
14. Do not expose to rain or use in damp locations.
15. Do not operate under influence of drugs or alcohol, or
when tired.
16. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
Mfd. for Woodstock in China
Date
S/N
WARNING!
PANTONE 151 C or RAL 2005
WARNING
CAUTION
PANTONE 109 C
COLOR CODES
READ and UNDERSTAND
MANUAL to avoid serious
injury! If a manual is not
available, DO NOT use
machine! Instead, go to
www.woodstockint.com
or call (360) 734-3482.
WARNING!
WARNING!
EYE/LUNG INJURY
HAZARD!
Always wear safety
glasses and a
respirator when
using this machine.
WARNING
ACCIDENTAL INJURY
HAZARD!
Disconnect power
supply before
adjustments, setup
or maintenance!
SF LOGO RED
PANTONE 1795C
COPYRIGHT © WOODSTOCK INTERNATIONAL, INC.
FOR SHOP FOX MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Woodstock will not accept labels changed without
approval.
If artwork changes are required, contact us immediately at
W1855 Machine Labels
(07/28/17)
• 1:1 Sizing (Labels are
actual size)
• Labels must be made of
chemical-resistant material
BELT DIRECTION
DISC DIRECTION
MODEL W1855
4" x 36" HORIZONTAL/VERTICAL
BELT SANDER w/6"DISC
Motor: 1/2 HP, 120V,
1-Ph, 60 Hz, 4.3A
Motor Speed: 3600 RPM
Belt Size: 4" x 36"
Belt Speed: 1900 FPM
Belt Tilt: 90°
Disc Type: 6" PSA
Disc Speed: 3600 RPM
Disc Table Tilt: 0° – 45°
Weight: 38 lbs.
Specifications
To reduce risk of serious injury while using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved eye protection and respirator.
3. Only plug power cord into a grounded outlet.
4. Support workpiece with miter gauge, backstop, or
worktable.
5. Maintain 1/16" maximum clearance between table and
sandpaper.
6. Never touch moving sandpaper.
7. Always sand according to directional arrows on machine.
8. Make sure sander is properly assembled, adjusted, and
stable before operating. Only operate with all guards in
place.
9. Never sand pointed stock with point facing into sanding
rotation, and never force workpiece into sanding surface.
10. Only remove jammed pieces when machine is stopped.
11. Turn motor OFF and disconnect power before changing
sandpaper, making adjustments, or servicing.
12. Do not wear loose clothing, gloves, jewelry, or other
articles that can get entangled. Tie back long hair, roll up
sleeves.
13. Never reach over moving sanding belt or disc.
14. Do not expose to rain or use in damp locations.
15. Do not operate under influence of drugs or alcohol, or
when tired.
16. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
Mfd. for Woodstock in China
Date
S/N
WARNING!
PANTONE 151 C or RAL 2005
WARNING
CAUTION
PANTONE 109 C
COLOR CODES
READ and UNDERSTAND
MANUAL to avoid serious
injury! If a manual is not
available, DO NOT use
machine! Instead, go to
www.woodstockint.com
or call (360) 734-3482.
WARNING!
WARNING!
EYE/LUNG INJURY
HAZARD!
Always wear safety
glasses and a
respirator when
using this machine.
WARNING
ACCIDENTAL INJURY
HAZARD!
Disconnect power
supply before
adjustments, setup
or maintenance!
SF LOGO RED
PANTONE 1795C
COPYRIGHT © WOODSTOCK INTERNATIONAL, INC.
FOR SHOP FOX MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Woodstock will not accept labels changed without
approval.
If artwork changes are required, contact us immediately at
W1855 Machine Labels
(07/28/17)
• 1:1 Sizing (Labels are
actual size)
• Labels must be made of
chemical-resistant material
BELT DIRECTION
DISC DIRECTION
MODEL W1855
4" x 36" HORIZONTAL/VERTICAL
BELT SANDER w/6"DISC
Motor: 1/2 HP, 120V,
1-Ph, 60 Hz, 4.3A
Motor Speed: 3600 RPM
Belt Size: 4" x 36"
Belt Speed: 1900 FPM
Belt Tilt: 90°
Disc Type: 6" PSA
Disc Speed: 3600 RPM
Disc Table Tilt: 0° – 45°
Weight: 38 lbs.
Specifications
To reduce risk of serious injury while using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved eye protection and respirator.
3. Only plug power cord into a grounded outlet.
4. Support workpiece with miter gauge, backstop, or
worktable.
5. Maintain 1/16" maximum clearance between table and
sandpaper.
6. Never touch moving sandpaper.
7. Always sand according to directional arrows on machine.
8. Make sure sander is properly assembled, adjusted, and
stable before operating. Only operate with all guards in
place.
9. Never sand pointed stock with point facing into sanding
rotation, and never force workpiece into sanding surface.
10. Only remove jammed pieces when machine is stopped.
11. Turn motor OFF and disconnect power before changing
sandpaper, making adjustments, or servicing.
12. Do not wear loose clothing, gloves, jewelry, or other
articles that can get entangled. Tie back long hair, roll up
sleeves.
13. Never reach over moving sanding belt or disc.
14. Do not expose to rain or use in damp locations.
15. Do not operate under influence of drugs or alcohol, or
when tired.
16. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
Mfd. for Woodstock in China
Date
S/N
WARNING!
PANTONE 151 C or RAL 2005
WARNING
CAUTION
PANTONE 109 C
COLOR CODES
READ and UNDERSTAND
MANUAL to avoid serious
injury! If a manual is not
available, DO NOT use
machine! Instead, go to
www.woodstockint.com
or call (360) 734-3482.
WARNING!
WARNING!
EYE/LUNG INJURY
HAZARD!
Always wear safety
glasses and a
respirator when
using this machine.
WARNING
ACCIDENTAL INJURY
HAZARD!
Disconnect power
supply before
adjustments, setup
or maintenance!
SF LOGO RED
PANTONE 1795C
COPYRIGHT © WOODSTOCK INTERNATIONAL, INC.
FOR SHOP FOX MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Woodstock will not accept labels changed without
approval.
If artwork changes are required, contact us immediately at
93
94
95
96
97
98
98
99
