Shop fox W1842, Руководство пользователя

Страница: 55 / 68

-53-
Model W1842 (For Machines Mfd. Since 6/17)
SE
RV
IC
E
Calibrating.Table.Height.
Scale
The table height scale, located below the handwheel, can
be adjusted for accuracy. However, material must be run
through the machine to adjust the scale. Make certain
you have followed the directions in .Operations for test
running before attempting to make these adjustments.
Tool.Needed:
Phillips Head Screwdriver #2 ..................................1
To.adjust.table.height.scale,.do.these.steps:
1.
Select a pre-planed piece of lumber to use for test.
Measure lumber with calipers and make a note of its
exact thickness.
2.
Move cutterhead to
1
⁄
16
" under thickness of your
lumber and feed your test board through planer.
3.
Turn handwheel
1
⁄
2
rotation and run board through
once more. Turn board over and repeat.
4.
Measure board again and compare your results
with the scale. If there is a discrepancy, loosen
scale pointer screw shown in
Figure 54.
and correct
position of pointer.
Figure.54.
Location of scale pointer screw.
Anti-Kickback.Fingers
The anti-kickback fingers are an important safety feature
of your moulder/planer. The fingers hang from a rod
suspended across the head casting and in front of the
infeed roller, as shown in Figure.55 . This design allows
the workpiece to easily enter the machine but reduces
the risk of kickback by digging into the workpiece if it
moves backward.
Check the anti-kickback fingers regularly to ensure they
swing freely and easily. If the fingers do not swing freely
and easily, first clean them with a wood-resin solvent,
then inspect them for damage. If any of the fingers are
damaged, the device must be replaced before using the
machine.
Do not apply oil or other lubricants to the anti-kickback
fingers that will attract dust and restrict free movement
of the fingers.
Figure.55.
Anti-kickback fingers.
Anti-Kickback Fingers
Proper. operation. of. anti-kickback.
fingers.is.critical.for.safe.operation.of.
this.machine..DO.NOT.operate.planer.if.
anti-kickback.fingers.are.not.operating.
correctly..Failure.to.heed.this.warning.
could.result.in.serious.personal.injury.