Shop fox W1842, Руководство пользователя

Страница: 42 / 68

-40-
Model W1842 (For Machines Mfd. Since 6/17)
O
PE
R
ATIO
NS
Figure.38.
Example of using guide rails.
Always.Use.Guide.Rails.When.Moulding
CORRECT
INCORRECT
Edge.Moulding.Tall.Workpieces
Figure 39. Correct support for tall
workpieces.
INCORRECT
CORRECT
Always use the guide rails (see Figure 38), so the
moulding profile can be cut with maximum safety and
without wander, twisting, or profile misalignment.
DO NOT attempt to cut moulding without using the guide
rails. Otherwise, the workpiece could shift and be ejected
from the machine, or the moulding pattern could be
inconsistent from one strip of molding to another.
When cutting edge profiles on workpieces that are taller
than they are wide, you must clamp wooden extension
rails to the table so they support at least 75% of the
workpiece height on both sides (see
Figure 39).
Never attempt to use the low-profile metal guide rails
that came with this machine if they do not adequately
support tall workpieces. If the workpiece slips out of the
rails because they are too low, the workpiece can be
ejected from the machine, causing severe injury.
Guide Rail
Extension
Rail