-7-
Model W1745W (For Machines Mfd. Since 9/16)
INT
ROD
U
CT
ION
Controls & Components
Refer to
Figures 1–3
and the following descriptions to
become familiar with the basic controls and components
of this machine. Understanding these items and how they
work will help you understand the rest of the manual and
stay safe when operating this machine.
Control Panel (Figure
1
):
ON/OFF Switch:
Starts and stops the motor. The switch
can be disabled to prevent unauthorized use by removing
disabling key.
Power Indicator Light:
Illuminates when machine is
plugged into power.
To reduce your risk of serious injury
or damage to the machine, read this
entire manual BEFORE using machine.
Table Movement Controls (Figure
2
):
Depth Scale:
Indicates depth of cut.
Infeed Table Adjustment Lever:
Adjusts position of
infeed table, which controls depth of cut.
Outfeed Table Handwheel:
Adjusts position of outfeed
table. Only used when setting outfeed table even with
cutterhead knives.
Fence Movement Controls (Figure
3
):
Fence Adjustment Knob:
Rotates to adjust lateral
position of fence along width of tables.
Tilt Lock:
Secures fence tilt setting at desire angle.
45° Fence Stop:
Stops fence at 45
°
inward and 45
°
degree
outward (135
°
).
Note:
Even when fence is resting against stops, tilt
lock must be tightened before starting machine.
90° Fence Stop:
Stops fence at 90° when engaged.
Note:
Even when fence is resting against stops, tilt
lock must be tightened before starting machine.
Fence Lock:
Tightens to secure fence position along
width of tables; loosens to allow adjustment.
Figure 3
. Fence movement controls.
Figure 1
. Pedestal-mounted controls.
Power
Indicator
Light
ON/OFF
Switch
Figure 2
. Table movement controls.
Infeed Table
Adjustment
Lever
Outfeed Table
Handwheel
Depth Scale
Fence Lock
Fence
Adjustment
Knob
45° Fence
Stop
90° Fence
Stop
Tilt
Lock
