-31-
Model W1745W (For Machines Mfd. Since 9/16)
O
PE
R
ATI
O
NS
15
30
45
Previously
Jointed
Edge
Squaring Stock
Squaring stock involves four steps performed in order
below:
1.
Surface Plane using Jointe
r: The concave face of
the workpiece face is surface planed flat with the
jointer (see
Figure 41
).
2.
Surface Plane on a Thickness Planer
: A thickness
planer flattens opposite workpiece face (see
Figure
42
).
Figure 41.
Surface plane using jointer.
Figure 42.
Surface plane using thickness
planer.
Figure 43.
Edge joint using jointer.
Figure 44.
Rip cut on table saw.
Previously Surface
Planed Face
Previously
Jointed
Edge
Previously
Planed Face
3.
Edge-Jointing using Jointer
: A concave workpiece
edge is jointed flat with jointer (see
Figure 43
).
4.
Rip-Cut on a Table Saw
: A jointed workpiece edge is
placed against a table saw fence and opposite edge
is cut off (see
Figure 44
).
