-22-
Model W1745W (For Machines Mfd. Since 9/16)
SE
TU
P
21.
Attach dust port to cabinet with (4) M5-.8 x 10
Phillips head screws and (4) 5mm flat washers (see
Figure 23
).
22.
Attach support arm with (2) M8-1.25 x 15 hex bolts
to back of infeed table, as shown in
Figure 24
.
Figure 23
. Attaching dust port to cabinet.
Figure 24
. Attaching support arm to infeed
table.
x 4
X2
Figure 25
. Securing cords to backside of
control panel pedestal.
Power Cord
Cord Clamps
x 2
Control
Panel Cord
23.
Plug motor cord into backside of control box, then
secure power cord and control panel cord with two
cord clamps using M5-.8 x 10 Phillips head screws, as
shown in
Figure 25
.
DO NOT operate this machine without an adequate
dust collection system (see Dust Collection on Page
24). This machine creates substantial amounts of
wood dust while operating. Failure to use a dust
collection system can result in short and long-term
respiratory illness.
