Shop fox W1745W, Руководство пользователя

Страница: 60 / 64

-58-
Model W1745W (For Machines Mfd. Since 9/16)
PA
RT
S
W1745W Labels A
11/27/15
MODEL W1745W
6" JOINTER
Motor: 1 HP, 120V, 1-Ph, 60 Hz, 12A
Cutterhead: 3 Knife, 2-1/2" Dia.
Replacement Knives: D4616
Knife Size: 6" x 3/4" x 1/8"
Cutterhead Speed: 4900 RPM
Cuts Per Minute: 14,700
Maximum Depth of Cut: 1/8"
Maximum Rabbeting Depth: 1/2"
Fence Tilt: 45º, 90º, 135º
Table Size: 7-1/2" x 46-1/2"
Weight: 269 lbs.
Specifications WARNING!
To reduce the risk of serious injury when using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved eye protection and respirator.
3. Except when rabbeting, keep all guards in place and in proper
operating condition. Always replace the guard after rabbeting.
4. Never perform jointing, planing, or rabbeting cuts on pieces smaller
than 8" long, 3/4" wide, or 1/4" thick.
5. Always use push blocks when face planing.
6. Keep hands at least 12" away from cutterhead.
7. Never cut deeper than 1/8" on a single pass.
8. Do not wear loose clothing, gloves, jewelry, or other items that
can get entangled. Tie back long hair and roll up sleeves.
9. Turn motor OFF and disconnect power before changing blades,
adjusting tables/fence, or servicing.
. m e h t t n e v e r p o t w o h d n a s d r a z a h " k c a b k c i k " f o e r a w a e B . 0 1
. s t c e f e d y n a r o , s t o n k e s o o l , s k c a r c h t i w s d r a o b t n i o j t o n o D . 1 1
. s s e n p m a d r o n i a r f o e e r f t n e m n o r i v n e y r d a n i e t a r e p o y l n O . 2 1
13. Always feed workpiece against cutterhead rotation.
14. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
Manufactured for Shop Fox in China
Date
S/N
COPYRIGHT © WOODSTOCK INTERNATIONAL, INC.
FOR SHOP FOX MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK WITHOUT WRITTEN APPROVAL!
Woodstock will not accept labels changed without approval. If artwork
changes are required, contact us immediately at
manuals@woodstockint.com
.
120 x 163mm
40 x 245mm
***
Labels marked *** have changed since last sending
Failure to keep hands clear
of cutterhead will result in
serious personal injury.
Failure to keep hands clear
of cutterhead will result in
serious personal injury.
Cutterhead
exposed between
these lines.
READ and UNDERSTAND
MANUAL to avoid serious
injury! If a manual is not
available, DO NOT use
machine! Instead, go to
www.shopfox.biz or call
(800) 840-8420.
WARNING! WARNING
ACCIDENTAL
INJURY HAZARD!
Disconnect power
supply before
adjustments, setup
or maintenance!
155mm x 22mm
51 x 84mm 51 x 84mm 51 x 84mm
105 x 54mm
36 x 32mm
COLOR CODES
DANGER PANTONE 485 C or RAL 3001
PANTONE 151 C or RAL 2005 WARNING
PANTONE YELLOW C CAUTION
WARNING!
EYE/EAR/LUNG
INJURY HAZARD!
Always wear safety
glasses, ear protection,
and respirator when
using this machine.
DANGER!
WARNING! WARNING!
ROTATING
CUTTERHEAD BELOW!
KICKBACK HAZARD!
1. Ensure outfeed table is
even with knives.
2. Never exceed the
maximum depth of cut.
3. Do not stand directly
behind workpiece.
ALWAYS USE
PUSH BLOCKS!
Push blocks minimize
possibility of the operator’s
hands contacting the
cutterhead while cutting.
Use this guard for all
operations possible, and
immediately re-install guard
following operations that
require its removal.
Note: Labels marked *** have changed since last sending.
***
COPYRIGHT © WOODSTOCK INTERNATIONAL, INC.
FOR SHOP FOX MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL!
Woodstock will not accept labels changed without
approval. If artwork changes are required, contact us immediately at
manuals@woodstockint.com .
• 1:1 Scale (Labels are
actual size)
• Labels must be made of
chemical-resistant material W1745 Labels C
(11/13/15)
Failure to keep hands clear
of cutterhead will result in
serious personal injury.
Failure to keep hands clear
of cutterhead will result in
serious personal injury.
Cutterhead
exposed between
these lines.
READ and UNDERSTAND
MANUAL to avoid serious
injury! If a manual is not
available, DO NOT use
machine! Instead, go to
www.shopfox.biz or call
(800) 840-8420.
WARNING! WARNING
ACCIDENTAL
INJURY HAZARD!
Disconnect power
supply before
adjustments, setup
or maintenance!
155mm x 22mm
51 x 84mm 51 x 84mm 51 x 84mm
105 x 54mm
36 x 32mm
COLOR CODES
DANGER PANTONE 485 C or RAL 3001
PANTONE 151 C or RAL 2005 WARNING
PANTONE YELLOW C CAUTION
WARNING!
EYE/EAR/LUNG
INJURY HAZARD!
Always wear safety
glasses, ear protection,
and respirator when
using this machine.
DANGER!
WARNING! WARNING!
ROTATING
CUTTERHEAD BELOW!
KICKBACK HAZARD!
1. Ensure outfeed table is
even with knives.
2. Never exceed the
maximum depth of cut.
3. Do not stand directly
behind workpiece.
ALWAYS USE
PUSH BLOCKS!
Push blocks minimize
possibility of the operator’s
hands contacting the
cutterhead while cutting.
Use this guard for all
operations possible, and
immediately re-install guard
following operations that
require its removal.
Note: Labels marked *** have changed since last sending.
***
COPYRIGHT © WOODSTOCK INTERNATIONAL, INC.
FOR SHOP FOX MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Woodstock will not accept labels changed without
approval. If artwork changes are required, contact us immediately at
manuals@woodstockint.com .
• 1:1 Scale (Labels are
actual size)
• Labels must be made of
chemical-resistant material
W1745 Labels C
(11/13/15)
Failure to keep hands clear
of cutterhead will result in
serious personal injury.
Failure to keep hands clear
of cutterhead will result in
serious personal injury.
Cutterhead
exposed between
these lines.
READ and UNDERSTAND
MANUAL to avoid serious
injury! If a manual is not
available, DO NOT use
machine! Instead, go to
www.shopfox.biz or call
(800) 840-8420.
WARNING! WARNING
ACCIDENTAL
INJURY HAZARD!
Disconnect power
supply before
adjustments, setup
or maintenance!
155mm x 22mm
51 x 84mm 51 x 84mm 51 x 84mm
105 x 54mm
36 x 32mm
COLOR CODES
DANGER PANTONE 485 C or RAL 3001
PANTONE 151 C or RAL 2005 WARNING
PANTONE YELLOW C CAUTION
WARNING!
EYE/EAR/LUNG
INJURY HAZARD!
Always wear safety
glasses, ear protection,
and respirator when
using this machine.
DANGER!
WARNING! WARNING!
ROTATING
CUTTERHEAD BELOW!
KICKBACK HAZARD!
1. Ensure outfeed table is
even with knives.
2. Never exceed the
maximum depth of cut.
3. Do not stand directly
behind workpiece.
ALWAYS USE
PUSH BLOCKS!
Push blocks minimize
possibility of the operator’s
hands contacting the
cutterhead while cutting.
Use this guard for all
operations possible, and
immediately re-install guard
following operations that
require its removal.
Note: Labels marked *** have changed since last sending.
***
COPYRIGHT © WOODSTOCK INTERNATIONAL, INC.
FOR SHOP FOX MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Woodstock will not accept labels changed without
approval. If artwork changes are required, contact us immediately at
manuals@woodstockint.com .
• 1:1 Scale (Labels are
actual size)
• Labels must be made of
chemical-resistant material W1745 Labels C
(11/13/15)
Failure to keep hands clear
of cutterhead will result in
serious personal injury.
Failure to keep hands clear
of cutterhead will result in
serious personal injury.
Cutterhead
exposed between
these lines.
READ and UNDERSTAND
MANUAL to avoid serious
injury! If a manual is not
available, DO NOT use
machine! Instead, go to
www.shopfox.biz or call
(800) 840-8420.
WARNING! WARNING
ACCIDENTAL
INJURY HAZARD!
Disconnect power
supply before
adjustments, setup
or maintenance!
155mm x 22mm
51 x 84mm 51 x 84mm 51 x 84mm
105 x 54mm
36 x 32mm
COLOR CODES
DANGER PANTONE 485 C or RAL 3001
PANTONE 151 C or RAL 2005 WARNING
PANTONE YELLOW C CAUTION
WARNING!
EYE/EAR/LUNG
INJURY HAZARD!
Always wear safety
glasses, ear protection,
and respirator when
using this machine.
DANGER!
WARNING! WARNING!
ROTATING
CUTTERHEAD BELOW!
KICKBACK HAZARD!
1. Ensure outfeed table is
even with knives.
2. Never exceed the
maximum depth of cut.
3. Do not stand directly
behind workpiece.
ALWAYS USE
PUSH BLOCKS!
Push blocks minimize
possibility of the operator’s
hands contacting the
cutterhead while cutting.
Use this guard for all
operations possible, and
immediately re-install guard
following operations that
require its removal.
Note: Labels marked *** have changed since last sending.
***
COPYRIGHT © WOODSTOCK INTERNATIONAL, INC.
FOR SHOP FOX MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Woodstock will not accept labels changed without
approval. If artwork changes are required, contact us immediately at
manuals@woodstockint.com .
• 1:1 Scale (Labels are
actual size)
• Labels must be made of
chemical-resistant material
W1745 Labels C
(11/13/15)
Failure to keep hands clear
of cutterhead will result in
serious personal injury.
Failure to keep hands clear
of cutterhead will result in
serious personal injury.
Cutterhead
exposed between
these lines.
READ and UNDERSTAND
MANUAL to avoid serious
injury! If a manual is not
available, DO NOT use
machine! Instead, go to
www.shopfox.biz or call
(800) 840-8420.
WARNING! WARNING
ACCIDENTAL
INJURY HAZARD!
Disconnect power
supply before
adjustments, setup
or maintenance!
155mm x 22mm
51 x 84mm 51 x 84mm 51 x 84mm
105 x 54mm
36 x 32mm
COLOR CODES
DANGER PANTONE 485 C or RAL 3001
PANTONE 151 C or RAL 2005 WARNING
PANTONE YELLOW C CAUTION
WARNING!
EYE/EAR/LUNG
INJURY HAZARD!
Always wear safety
glasses, ear protection,
and respirator when
using this machine.
DANGER!
WARNING! WARNING!
ROTATING
CUTTERHEAD BELOW!
KICKBACK HAZARD!
1. Ensure outfeed table is
even with knives.
2. Never exceed the
maximum depth of cut.
3. Do not stand directly
behind workpiece.
ALWAYS USE
PUSH BLOCKS!
Push blocks minimize
possibility of the operator’s
hands contacting the
cutterhead while cutting.
Use this guard for all
operations possible, and
immediately re-install guard
following operations that
require its removal.
Note: Labels marked *** have changed since last sending.
***
COPYRIGHT © WOODSTOCK INTERNATIONAL, INC.
FOR SHOP FOX MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL!
Woodstock will not accept labels changed without
approval. If artwork changes are required, contact us immediately at
manuals@woodstockint.com .
• 1:1 Scale (Labels are
actual size)
• Labels must be made of
chemical-resistant material W1745 Labels C
(11/13/15)
SHOPFOX.BIZ
ON/OFF POWER
W1745W Labels B
5/21/15
COPYRIGHT © WOODSTOCK INTERNATIONAL, INC.
WARNING: THIS LABEL ARTWORK SHALL NOT BE REPRODUCED AND IS ONLY TO BE USED
ON WOODSTOCK MACHINES.
193 x 104mm
Failure to keep hands clear
of cutterhead will result in
serious personal injury.
Failure to keep hands clear
of cutterhead will result in
serious personal injury.
Cutterhead
exposed between
these lines.
READ and UNDERSTAND
MANUAL to avoid serious
injury! If a manual is not
available, DO NOT use
machine! Instead, go to
www.shopfox.biz or call
(800) 840-8420.
WARNING! WARNING
ACCIDENTAL
INJURY HAZARD!
Disconnect power
supply before
adjustments, setup
or maintenance!
155mm x 22mm
51 x 84mm 51 x 84mm 51 x 84mm
105 x 54mm
36 x 32mm
COLOR CODES
DANGER PANTONE 485 C or RAL 3001
PANTONE 151 C or RAL 2005 WARNING
PANTONE YELLOW C CAUTION
WARNING!
EYE/EAR/LUNG
INJURY HAZARD!
Always wear safety
glasses, ear protection,
and respirator when
using this machine.
DANGER!
WARNING! WARNING!
ROTATING
CUTTERHEAD BELOW!
KICKBACK HAZARD!
1. Ensure outfeed table is
even with knives.
2. Never exceed the
maximum depth of cut.
3. Do not stand directly
behind workpiece.
ALWAYS USE
PUSH BLOCKS!
Push blocks minimize
possibility of the operator’s
hands contacting the
cutterhead while cutting.
Use this guard for all
operations possible, and
immediately re-install guard
following operations that
require its removal.
Note: Labels marked *** have changed since last sending.
***
COPYRIGHT © WOODSTOCK INTERNATIONAL, INC.
FOR SHOP FOX MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Woodstock will not accept labels changed without
approval. If artwork changes are required, contact us immediately at
manuals@woodstockint.com .
• 1:1 Scale (Labels are
actual size)
• Labels must be made of
chemical-resistant material
W1745 Labels C
(11/13/15)
401
402
403
404
405
407
408
409
410
411V2
412
413
406
Specifications
Date
S/N
WARNING!
MODEL W1745W
6" JOINTER
Motor: 1 HP, 120V, 1-Ph, 60 Hz, 12A
Cutterhead: 3 Knife, 2-1/2" Dia.
Replacement Knives: D4616
Knife Size: 6" x 3/4" x 1/8"
Cutterhead Speed: 4900 RPM
Cuts Per Minute: 14,700
Maximum Depth of Cut: 1/8"
Maximum Rabbeting Depth: 1/2"
Fence Tilt: 45º, 90º, 135º
Table Size: 7-1/2" x 46-1/2"
Weight: 269 lbs.
To reduce the risk of serious injury when using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved eye protection and respirator.
3. Except when rabbeting, keep all guards in place and in proper
operating condition. Always replace the guard after rabbeting.
4. Never perform jointing, planing, or rabbeting cuts on pieces smaller
than 8" long, 3/4" wide, or 1/4" thick.
5. Always use push blocks when face planing.
6. Keep hands at least 12" away from cutterhead.
7. Never cut deeper than 1/8" on a single pass.
8. Do not wear loose clothing, gloves, jewelry, or other items that
can get entangled. Tie back long hair and roll up sleeves.
9. Turn motor OFF and disconnect power before changing blades,
adjusting tables/fence, or servicing.
10. Be aware of "kickback" hazards and how to prevent them.
11. Do not joint boards with cracks, loose knots, or any defects.
12. Only operate in a dry environment free of rain or dampness.
13. Always feed workpiece against cutterhead rotation.
14. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
Mfd. for Shop Fox in China
Specifications
Date
S/N
WARNING!
MODEL W1745W
6" JOINTER
Motor: 1 HP, 120V, 1-Ph, 60 Hz, 12A
Cutterhead: 3 Knife, 2-1/2" Di
a.
Replacement Knives: D4616
Knife Size: 6" x 3/4" x 1/8"
Cutterhead Speed: 4900 RPM
Cuts Per Minute: 14,700
Maximum Depth of Cut: 1/8"
Maximum Rabbeting Depth: 1
/2" Fence Tilt: 45º, 90º, 135º
Table Size: 7-1/2" x 46-1/2"
Weight: 269 lbs.
To reduce the risk of serious injury
when using this machine:
1. Read and understand
owner’s manual before operati
ng.
2. Always wear approved
eye protection and respirator.
3. Except when rabbeting, keep
all guards in place and in proper operating condition. Always
replace the guard after rabbeti
ng.
4. Never perform jointing, planing,
or rabbeting cuts on pieces smaller
than 8" long, 3/4" wide, or 1/4"
thick. 5. Always use push blocks when
face planing. 6. Keep hands at least 12" away
from cutterhead.
7. Never cut deeper than 1/8" on
a single pass. 8. Do not wear loose clothing, gloves,
jewelry, or other items that can get entangled. Tie back
long hair and roll up sleeves. 9. Turn motor OFF and disconnect
power before changing blades, adjusting tables/fence, or servi
cing.
10. Be aware of "kickback" hazards
and how to prevent them. 11. Do not joint boards with cracks,
loose knots, or any defects. 12. Only operate in a dry environm
ent free of rain or dampness. 13. Always feed workpiece against
cutterhead rotation. 14. Prevent unauthorized use by
children or untrained users;
restrict access or disable machi
ne when unattended.
Mfd. for Shop Fox in China
Labels & Cosmetics
REF PART # DESCRIPTION REF PART # DESCRIPTION
401 X1745W401 CUTTERHEAD WARNING LABEL 408 X1745W408 SHOP FOX NAMEPLATE
402 X1745W402 CONTROL PANEL LABEL 409 X1745W409 MODEL NUMBER LABEL
403 X1745W403 CUTTERHEAD EXPOSURE WARNING LABEL 410 X1745W410 SHOP FOX BLACK
404 X1745W404 ELECTRICITY LABEL 1.4W X 1.2H 411V2 X1745W411V2 MACHINE ID LABEL W/TUV V2.09.16
405 X1745W405 EYE/EAR/LUNG HAZARD LABEL 412 X1745W412 UPPER DECORATIVE STRIP TAPE
406 X1745W406 SHOP FOX WHITE 413 X1745W413 READ MANUAL LABEL 2W X 3.3H
407 X1745W407 DISCONNECT POWER LABEL