SHNING 3D Aoralscan 2, Руководство пользователя

Страница: 100 / 112

Aoralscan 2 User Manual
SHNING 3D TECH Co.,Ltd Copyright

2019 All Rights Reserved
- 99 -

When the scanner tip is detached from the scanner, always protect the
subtle units and the inner optical components on the front end of the scanner
body by putting on the supplied protection cap.
9.2. Scanner Cradle Care
The scanner cradle requires an intermediate-level disinfection.
Disinfection
WARNINGS

Concerning hand hygiene and personnel safety when performing pre-
cleaning and disinfection/sterilization, you must wear clean surgical gloves
before you start.

Always ensure that you have pre-cleaned and disinfected/sterilized
the scanner body, scanner cradle, and scanner tip before each scan.

The caring methods for the scanner cradle, scanner body, and
scanner tip are different and must be executed separately. After disinfecting
the scanner cradle, you may proceed with the scanner body and finally the

Scanner tip. See Scanner body care on chapter 9 and Scanner tip
care on chapter 9 for details.

Ensure that the scanner body is not placed in the cradle prior to
disinfecting the scanner cradle.
Follow the steps below to complete the disinfection:
(1) Disconnect the power of the Aoralscan 2 (see Disconnecting the
scanner on chapter 4).
(2) Hold the cradle firmly with your hand.
(3) Use new cotton gauze moistened with 70%-75% solution of ethanol to
wipe the surface of cradle.
CAUTION