SHNING 3D Aoralscan 2, Руководство пользователя

Страница: 10 / 112

Aoralscan 2 User Manual
SHNING 3D TECH Co.,Ltd Copyright

2019 All Rights Reserved
- 9 -
package.

Connecting the scanner to an unknown power adapter is very
dangerous and may lead to fire or explosion.

Using cables or accessories other than those specified for use with the
scanner may result in increased emissions or decreased immunity of the
device.

The supplied medical grade power adapter should only be connected
to a grounded power socket.

Do not connect USB peripherals with an extended USB cable.
Extended connection may cause unexpected usage fault.

Always handle the scanner with care and avoid hitting or scratching
the surfaces as it contains fragile components. Dropping the scanner on the
floor may cause permanent damage. If you accidentally drop the scanner, you
MUST dispose of the scanner tip immediately and do not use the same tip
again. The mirror in the tip might shatter into small pieces, and using it again
poses the highest risk of causing serious injury to the user and patient.

The scanner might heat up to above the normal body temperature, yet
this short- term exposure and contact with small areas will not pose a health or
safety hazard to the patient.

Never place any objects or load on the scanner and its cradle.

Pay close attention to the hygiene guidelines given in Pre-cleaning,
disinfection, and sterilization on chapter 9.

Do not dispose of this scanner as unsorted municipal waste. The
scanner must be collected separately and disposed of in accordance with the
local laws and regulations. For proper disposal of this scanner, contact your
local representative of Shining3D Corporation.
2.2. Legend of Labels and Symbols
The followi
ng symbols provide information on the product’s labels and
regulatory compliance.