SHNING 3D Aoralscan 2, Руководство пользователя

Страница: 30 / 112

Aoralscan 2 User Manual
SHNING 3D TECH Co.,Ltd Copyright

2019 All Rights Reserved
- 29 -
4. Setting up the Scanner
4.1. Connecting the Scanner
CAUTIONS

Ensure the supplied software programs are installed on your computer
before the connection.

Install the scanner in accordance with the instructions stated in this
User Manual.

Use the scanner only in dental laboratories, dental clinics, and
equivalent environment.

Do not install, place, and use the scanner in dusty and damp
environment or in the areas of temperature extremes or in direct sunlight.

Prepare a flat surface, e.g. your desk, for the scanner and the cradle.
Do not place them on a slanted surface.

Before the installation is completed, do not plug the power adapter into
the wall outlet or turn on the scanner until you are instructed to do so.

Always return the scanner to the cradle when it is not in use. Do not
place the scanner in heated or wet surfaces as this can cause damage to the
tip and scanner.

It is normal that the scanner gets warm when in use.
WARNING
Ensure that you use only the supplied power adapter,power cable,
and USB cable.
Follow the steps below to complete the connection:
(1) Make sure the scanner tip is firmly attached to the front end of the
scanner; otherwise, gently and firmly slide the scanner tip onto the front-end of
the scanner, as illustrated.