SHNING 3D Aoralscan 2, Руководство пользователя

Страница: 101 / 112

Aoralscan 2 User Manual
SHNING 3D TECH Co.,Ltd Copyright

2019 All Rights Reserved
- 100 -
Avoid using detergent of any kind as some detergents or surfactants
might penetrate into the surface of the cradle.
(4) When done, store the cradle in a clean and safe place.
(5) Proceed to the disinfection of the scanner body (see Scanner body
care on chapter 9).
9.3. Scanner Body Care
The scanner body requires an intermediate-level disinfection.
Disinfection
WARNINGS

Concerning hand hygiene and personnel safety when performing pre-
cleaning and disinfection/sterilization, you must wear clean surgical gloves
before you start.

Always ensure that you have pre-cleaned and disinfected/sterilized
the scanner body, scanner cradle, and scanner tip before each scan.

The caring methods for the scanner cradle, scanner body, and
scanner tip are different and must be executed separately. Before disinfecting
the scanner body, you shall start with the cradle first. See Scanner cradle care
on chapter 9) for details.

Ensure that the scanner tip is detached from the scanner, and the
protection cap is put on the scanner when disinfecting the scanner body.
Follow the steps below to complete the disinfection:
(1) Disconnect the power of the Aoralscan 2 (see Disconnecting the
scanner on chapter 4).
(2)Hold the scanner tip firmly with your thumb and forefinger on both sides,
and then gently slide the tip off from the scanner, as illustrated.