Shinko HR-700, Инструкция по эксплуатации

Страница: 87 / 124

86
7.2.7 Setting the Communication Function
Sets Local Address, Communication speed, Data Length, Parity Bit and Stop Bit.
Example: Local Address: 02, Communication speed: 1200 bps, Data Length: 7 bits, Parity Bit: Even,
Stop Bit: 2 bits
Enter engineering mode (See the Key Operation to Enter
Engineering Mode on page 76). Use the key to
display “ ”, and press the “ENT” key.
Use the key to display " ", and press the
“ENT” key. (Select from to )
Use the key to display " ", and press the “ENT”
key. (Select from 1200, 2400, 4800, 9600)
Use the key to display " ", and press the “ENT”
key. (Select from 7 bits, 8 bits)
Use the key to display " ", and press the “ENT”
key. (Select from EVEN, ODD and NONE)
Use the key to display " ", and press the “ENT”
key. (Select 1 bit or 2 bits)
Once setting is completed, the recorder will return to
Communication Function Setting screen.
7.2.8 Initializing the Setup Data
The setup data reverts to the default value.
Since this function initializes all setup data, be careful when executing this function.
Calibration data is not initialized.
Example: Initializing the Setup Data.
Enter engineering mode (See the Key Operation to Enter
Engineering Mode on page 76). Use the key to
display " ", and press the “ENT” key.
Use the key to select " ", and press the “ENT”
key.
Initialization is completed.
ENT
PRINT
ENT
PRINT
ENT
Display Operation Keys Description
PRINT
ENT
Display Operation Keys Description
ENT
PRINT
ENT
PRINT
ENT
ENT PRINT
PRINT
ENT
ENT PRINT
PRINT
ENT
(Local address)
(Communication speed)
(Data length)
(Parity bit)
(Stop bit)