Shinko HR-700, Инструкция по эксплуатации

Страница: 31 / 124

30
5.2 Setting the Cartridge Pen
(1) Press the “REC” key for 3 seconds or longer.
With the power turned on, press the “REC” key for 3 seconds or longer.
Once recording stops, the REC indicator goes off. (See Fig. 5.1-1 on page 23.)
The pen and printer automatically move, discontinuing paper feed. No. 1 pen (red) records the left
side (approx. 15 %) and No. 2 pen (green) records the right side (approx. 85 %), respectively.
(See Fig. 5.1-2 on page 23.)
(2) Open the Door.
Push the door hook to unlock the door. Pull the door to open it. (See Fig. 5.1.3 on Page 24.)
(3) Detach the Cartridge Pen.
(3) Pull out the Cartridge Pen.
Fig. 5.2-1 Detaching the Cartridge Pen
CAUTION
To replace the cartridge pen, be sure to press the “REC” key to stop recording.
Pen Holder
Cartridge Pen
Hold here using
your fingers.
Pen Pipe
[Note]
When pulling out the cartridge pen, do not hold the pen pipe. If it becomes bent, improper
recording may result.
CAUTION
Maximum angle of the fully opened door is 135 degrees. Do not open the door any further, as the
hinge will break.
WARNING
To avoid injury to fingers, be careful when opening/closing the door.