Shinko HR-700, Инструкция по эксплуатации

Страница: 85 / 124

84
Example: Setting the logging printing Synchronous to start at 18:00 every day
Enter engineering mode (See the Key Operation to Enter
Engineering Mode on page 76). Use the key to
display " ", and press the “ENT” key.
Use the key to select " ", and press the
“ENT” key.
Use the key to display " ", and press the “ENT”
key.
Use the key to alter a numeral, and key to shift a
digit. Then, set the time and press the “ENT” key.
Use the key to display " ", and press the “ENT”
key. (Select from 10 min, 15 min, 20 min, 30 min, 1H, 2H,
3H, 4H, 6H, 8H, 12H, 24H)
Select with the key, and press the “ENT” key.
Once setting is completed, the recorder will return to the
Logging Printing setting screen.
(5) Printing Gap Correction ON/OFF
Sets printing gap correction. This function is available only for DI asynchronous printing and
asynchronous logging printing.
Example: When setting the printing gap correction to ON.
Enter engineering mode (See the Key Operation to Enter
Engineering Mode on page 76). Use the key to
display " ",
and press the “ENT” key. Use the key to select "
", and press the “ENT” key.
Use the key to display " ", and press the “ENT”
key.
Once setting is completed, the recorder will return to the
Printing gap correction setting screen.
ENT
PRINT
ENT
PRINT
ENT
ENT
PRINT
Display Operation keys Description
ENT
PRINT
ENT
ENT PRINT
PRINT
ENT
FEED
PRINT
ENT
Display Operation Keys Description
ENT PRINT
(Synchronous/Asynchronous)
(Printing start time)
(Interval)
ENT PRINT