Shini ST1-S, Руководство пользователя

Страница: 58 / 142

58(142)
EXI.1 interval:
“
0
”
stands for
“
extend input 1 machine
”
inputs move signal once
for each part.
“
5
”
stands for machine inputs move signal once for each 5
products (the 6th, 12ed, 18th, 24th
…
part).
Press F2 switch to program parameter page.
4.5.4 Loop Parameters
The user should set loop parameters and sample position parameters if system
has set cycle actions and production sample.
Each program can have two loop areas at the same time, loop 1 and loop 2.
If current program just has
“
loop 1 setup
”
or
“
loop 2 setup
”
, the user just should
set loop 1 or loop 2 parameters. If current program has loop 1 and loop 2 setup,
the user should set both of the parameters.
Press F2 switch loop 1 and loop 2 setting page.
Loop 1
“
position
”
setting page see picture 4-14:
Picture 4-14
The loop 1 setup page including two areas: mode and position. Press F3 to
switch mode and position page. Press
Ç
/
È
to select parameter.
Product release mode: set the mode of loop, regular mode or free mode.