Shini ST1-S, Руководство пользователя, Страница: 25 / 142

25(142)
Adjusting the 0-Position of X1-Axis
（
the length of stroke
）：
1) Release stop package
“
B
”
2) Run the X1-axis to the 0-position
3) Manually push cylinder piston rod to the fully extended state
4) Fix the stop package
“
B
”
Adjusting the 0-Position of X2-axis
：
1) Run the X2 -axis to its 0-position
2) Release bracket
“
A
”
3) Manually push bracket
“
A
”
to ole-strut, in the compression state
4) Fix the stop package
“
A
”
Adjusting the End-Position of X2-Axis
（
the length of stroke
）：
1) Release stop package
“
B
”
2) Run the X2-axis to its end- position
3) Manually push cylinder piston rod to the fully extended state
4) Fix the stop package
“
B
”
2.3.5 Adjusting the Y- Position
Set the end-position of Y-axis by adjusting up-going shock absorber.
Adjusting the End-Position of Y-axis
：
1) Loosen shock absorber on the end position
2) Push the cylinder on Y-axis to its end position
3) Rotate the up-going shock absorber to the in the fully compression state
4) Fix the shock absorber
The withdrawal position can be set using the stop package.
Adjusting the Withdrawal Position
1) Run the Y-axis to its end position
2) Seal off the compressed air
3) Loosen the Y-axis stop package
4) Manually push Y-axis to the desired position
5) Push stop package to ole-strut, in the compression state
6) Fix the Y-stop-package