Shini SG-16N Series, Руководство пользователя

Страница: 47 / 60

47(60)
6.2.3 Monthly Check
1) Check the motor operation.
2) Check the belt's tensility every 6 months. More details to see chapter 6.2
Transmission.
6.3 Cleaning
Caution:
Cutting blades are very sharp, extreme caution must be used when
working on an open cutting chamber.
1) Check the cutting chamber is clear before stopping the granulator.
2) Switch of the main power
3) Cleanning plate of the feed box with dust-collecting machine.
4) Cleaning external surface of the feed box.
5) Open the feed box.
6) Clean all internal surfaces of the feed box.
6) Remove and clean the material collection box.
8) Clean screen and screen bracket.
9) Outer and inner of cutting chamber.
10) Cleaning belt pulleys with shinning dust-removing agent.
11) Blow the Clearance hole in the side plate of cutting chamber with pressed air
(A), and rotate blades to remove cutting material inside bearing block.
Suggest Cleaning once a day.
Gas hole A
Picture 6-6: Clearing the Dust Collection Chambers
Caution!
Cover safety switch with a protective sleeve to avoid any dusts.