Shini SG-16N Series, Руководство пользователя

Страница: 34 / 60

34(60)
4.
Operation Guide
Wear earplugs during operating to avoid personal injury!
Wear gloves during operating to avoid personal injury!
Wear goggles during operating to avoid personal injury!
Because the blades and rotor may be loosen, check the following items
before operating
：
1) If the blades has any damage.
2) If the surface of the rotor is loosen.
3) Push or pull the rotor and blades to see if there is any loose
connection.
If any of the above situations is found, please contact local representative or
SHINI Company for help.
4.1 Startup Pretest
Unpainted part of the machine has been covered with stainless oil. Before use,
the stainless oil should be cleaned.
1) Clean with a towel.
2) Wash with a towel dipping with amyl acetate.
4.1.1 Before the First Startup
1) Check whether the granulator is in the level state.
2) Check the space of the cutting tools to see whether the lockup screws of the
blades are tightened (torque: 280Nm).
4.1.2 After First Startup for 2 Hours
1) Check the space of the cutting tools of the fixed blades and rotating blades
again; check whether the lockup screws of the blades are loose.
2) Check the position-adjusting screws of the motor and check whether the
position-adjusting screws are tightened.