Shini SG-16N Series, Руководство пользователя

Страница: 44 / 60

44(60)
1) Remove the fixed blades
CAUTION!
To avoid self rotation, block the rotating blade with a thick wood block.
1) Remove the screws and insulation rings.
2) Remove the blades.
3) Clean the installation surface of the blades.
2) Remove the rotating blades
1. Loosen and remove the hexagon socket cap screw.
2. Clean the whole rotating blades and cutting chamber.
CAUTION!
Press the pressing block and blade when you remove the last screw.
3) Install the blades
Clean carefully the fixed blades and rotating blades and then install them.
CAUTION!
Each time to replace the blade, the screw and insulation ring must be
replaced also.
Install the back fixed blades then the front fixed blades, finally the
rotating blades. More details about replacing or maintaining the blades to
see chapter 3.4.
4) Check the blades
Turn around the blade rest till all the blades can rotate freely.
6.1.2 Transmission
1. Daily Maintenance of V Belts
Transmission belts are fixed according to motor power.
1) Check the V belts
Check V belts' tensility after a full-load operation for 20-30 hours. And then
check its abrasion condition monthly.