Shini SG-16N Series, Руководство пользователя

Страница: 17 / 60

17(60)
Notice
Read the instruction manual carefully before
operating.
Before start, do the safety device test
according to the instruction. It is not allowed
to change the design of the machine unless it
is approved from the manufacturer.
This is to indicate motor rotating direction.
When phase reversal happens, the alarm
sounds and indicator on control panel will
indicate.
Please exchange the place of two of the
electrical wires to solve this problem.
1.4.2 Transportation and Storage of the Machine
Transportation
1) SG-16N / 20N series of granulator are packed in plywood cases with wooden
pallet at the bottom, suitable for quick positioning by fork lift.
2) After unpacked, castors located at the bottom of the machine can be used for
easier movement.
3) Do not rotate the machine and avoid collision with other objects during
transportation to prevent improper functioning.
4) The structure of the machine is well-balanced and has device for
transportation although it should also be handled with care when lifting the
machine for fear of falling down.
5) The machine and its attached parts can be kept at a temperature from -25
℃
to +55
℃
for long distance transportation and for a short distance, it can be
transported with temperature under +70
℃
.
Storage
1) SG-16N / 20N series granulator should be stored indoors with temperature
kept from 5 to 40 and humidity below 80%.
℃ ℃
2) Disconnect all power supply and turn off main switch and control switch.
3) Keep the whole machine, especially the electrical components away from
water to avoid potential troubles caused by the water.
4) Plastic film should be used to protect the machine from dust and rains.