Shini SG-16N Series, Руководство пользователя

Страница: 35 / 60

35(60)
4.1.3 After First Startup for 20~30 Hours
Check and adjust the belt's tensility after a 20~30-hour full-load operation.
4.2 Start and Stop the Granulator
The granulator is controlled by circuit breaker, safety switch, START / STOP
button and emergency stop button.
Main power switch:
It is located at the front control panel. Through rotating the switch to control the
startup and stop of the machine.
Picture 4-1: Main Power Switch
START button and STOP button:
These two buttons control the startup and stop of the machine.
Emergency stop:
When an accident happens, this button can do a favor.
Picture 4-2: Stop, Emengency Stop and Startup button
CAUTION!
If there are ungrinded crew materials in the feed box or cutting chamber,
the granulator shall NOT be stopped, otherwise the crew materials will
blockade the rotor and the motor will be overloaded next time you start
the machine up.