SHEKEL HL318LC, Руководство пользователя

Страница: 15 / 19

14
the accumulated value; then it goes back to normal weighing status.
If it displays
【 】
for one second and then goes back to normal
weighing mode, it means invalid operation! Causes: 1. The scale must
be zeroed between two successive accumulation operations,
otherwise, accumulation will be refused. 2. Accumulation is valid
only when the displayed weight is ≥F2.2 setting. 3. The scale is in
dynamic status.
Adjusted display, clearing, and printing of accumulated value
In normal weighing mode, hold
『
Total
』
on the operation panel for
over two seconds, it displays
【 】
for one second; then the
monitor shows the present accumulated value
【 】
or times
of accumulation
【 】
; press
『
Gross
』
,
『
Ib/kg
』
to change over;
。
now the adjustment display icon goes on. Now if it’s necessary to
clear the accumulated value, press
『
Zero
』
to have the display
becomes into “0”. If F4.2.1=1, pressing
『
Print
』
can print the
accumulated data. To exit the interface, press
『
Hold
』
.
Note: whether to be over the specific data and accumulated data can
be set in F4.6.
●
Counting scale function F2.1 = 5
Instrument display
【 】，
displays the present counts
Sampling method
1. Check whether the scale is at Zero, otherwise, press
『
Zero
』
.
2. Put the counted material onto the scale platform.
3. Hold
『
Total
』
until
【 】
is displayed; then press
『
Print
』
.
If F2.6 = 0, it displays
【 】
. Enter the value just counted and then
press
『
Print
』
to confirm, the sampled data will be saved and the
system exits sampling interface. If F2.6 = 1, it displays
【 】
; enter
the sample weight and press
『
Print
』
; the system saves the setting
data and exits sampling setting interface.
4. In this function, press
『
Hold
』
to switch between counts and weight.