Sharp Zaurus SL-5500 Скачать руководство пользователя страница 45

Страница: 45 / 84

PC-UM10M

SL-5500 DISASSEMBLY AND ASSEMBLY

– 44 –

[COUNTERMEASURES AGAINST STATIC ELECTRICITY]

• Use a wrist strap (earth band).

• Never touch the PWB with bare hands.

• When handling the PWB, hold the edge.

• Use only the specified fine solder.

• Soldering condition: 320 degrees, max. 3 sec.

PWB Insulation Sheet attachment

Clean and remove oil with IPA from the PWB Insulation Sheet of the

PWB, and attach the sheet to the attachment reference. After
attachment, press the attached section to secure attachment.

b. CF Card Connector Frame attachment, soldering, CF Tape attach-

ment

While inserting the Hold Down Pawls (2 pcs.) of the CF Card into
the PWB, put it over the CF Card Connector. Then solder the Hold

Down Pawls (2 pcs.). (Either the front or the back may be soldered.)

Attach and fold the CF Tape to the CF Card Connector Frame

according to the reference below.

Note: (1) The sheet must not extend out of the outward form of

the PWB.

(2) There must be free from wrinkles, folds, and projec-

tions by pinching foreign materials.

(3) There must be free from dirt and fingerprints. If there

is, remove completely.

-0.2

Attachment reference

(PWB outward form line)

Must be located between
right and left attachment
reference patterns.

PWB Insulation Sheet

Attachment reference
pattern

Note: (1) Be careful not to bend the CF Connector Pin.

(2) Put the connector frame closely in contact with the

PWB.

-0

-0.5

+0.5

CF Tape

Hold Down Pawls

[CF Tape attachment]

CF Card Connector Frame

Do not hang
on this metal

Attachment reference

CF Tape

Folding attachment

Содержание Zaurus SL-5500





















































































Результаты поиска

Содержание Zaurus SL-5500

Отзывы:

Похожие инструкции для Zaurus SL-5500

Бренды по названию

Популярные бренды

Sharp Zaurus SL-5500, Руководство по обслуживанию

Результаты поиска

Содержание Zaurus SL-5500

Отзывы:

Похожие инструкции для Zaurus SL-5500

Бренды по названию

Популярные бренды