Sharp Zaurus SL-5500 Скачать руководство пользователя страница 3

Страница: 3 / 84

PC-UM10M

SL-5500 SPECIFICATIONS

– 2 –

1-3. COMMON SPECIFICATIONS

The following table provides a brief overview of SL-5500 common hardware specifications.

1-4. INTERFACE SPECIFICATIONS

The following table provides a brief overview of SL-5500 hardware interface specifications.

Power Supply

AC Adapter (bundled): 5.0V DC

Replaceable Lithium-ion battery (bundled): 3.7V DC

Memory backup battery (Built-in): 3.0V DC

Battery life

When the power of the SL-5500 is turned on at a temperature of under 25°C (75°F), with no peripheral
device (including the CF memory card) connected, after the rechargeable battery (EA-BL06) is fully
charged.

• approx. 10 hours (when you display the Day view mode screen of the Calendar application continu-

ously with the frontlight turned off.)

• approx. 1 hour (when you play the mpeg 1 file continuously with the frontlight at its brightest level

turned on.)

Data storage time

When the power of the SL-5500 is turned off at a temperature of under 25°C (75°F) after the brand-new
battery is fully charged.

• approx. 10 days

When the operating battery is exhausted and the power can not be turned on.

• approx. 1 day

When the operating battery is not inserted after the rechargeable back-up battery is fully charged.

• approx. 5 minutes

Number of charging and discharg-
ing of the operating battery life

Approx. 500 times.
Note: The Battery life and storage time may vary depending on the usage.

Power Consumption

2.5 W (with battery)

6.2 W (with AC adapter)

Temperature Range

For operation: 0°C to 40°C (32°F to 104°F)

For charging battery: 5°C to 35°C (37°F to 99°F)

Dimensions
(when the slide cover is closed)

Excluding the display protection cover

Approx. 74 (W) x 138 (D) x 18 (H) mm

Approx. 2.9 (W) x 5.4 (D) x 0.7 (H) inches

Including the display protection cover (excluding protruding parts)

Approx. 74 (W) x 138 (D) x 21 (H) mm

Approx. 2.9 (W) x 5.4 (D) x 0.8 (H) inches

Weight

Excluding display protection cover: Approx. 194 g (6.8 oz)

Including display protection cover: Approx. 212 g (7.5 oz)

Above values include battery, stylus, and CF Slot Protection Card

Bundled Accessories

Docking Station (USB direct coupled cable)

AC adapter (P/N: EA-70, for IN 100-240 VAC) and Power Cord

Lithium-Ion Battery (P/N: EA-BL06)

Stylus, Display Protection Cover, CF Slot Protection Card

Card Slot

CF type

ΙΙ

x 1 (Compact Flash)

SD card x 1 (no copyright protection feature)

I/O Port

Infrared (115.2 kbps, Link Distance 5 ~ 20cm)

Serial port (Proprietary 16-pin)

Serial/USB I/F (via docking station) port

Sound

Stereo Headphone Jack including Audio input (Mono)

Buzzer

Содержание Zaurus SL-5500





















































































Результаты поиска

Содержание Zaurus SL-5500

Отзывы:

Похожие инструкции для Zaurus SL-5500

Бренды по названию

Популярные бренды

Sharp Zaurus SL-5500, Руководство по обслуживанию

Результаты поиска

Содержание Zaurus SL-5500

Отзывы:

Похожие инструкции для Zaurus SL-5500

Бренды по названию

Популярные бренды