Sharp PN-HB651, Руководство по эксплуатации

Страница: 43 / 57

43
E
PICTURE menu
Function Command Direction Parameter Reply Control/Response contents *
BRIGHT VLMP WR 0-31 0-31
○
CONTRAST CONT WR 0-60 0-60
BLACK LEVEL BLVL WR 0-60 0-60
TINT TINT WR 0-60 0-60
COLORS COLR WR 0-60 0-60
SHARPNESS SHRP WR 0-24 0-24
COLOR
ADJUSTMENT COLOR MODE BMOD WR 0 0 STD
2 2 VIVID
3 3 sRGB
4 4 HIGH ILLUMINANCE
WHITE BALANCE WHBL WR 0-2 0-2 0:THRU, 1:PRESET, 2:USER
PRESET CTMP WR 1-28 1-28 From 1: approximately 3000K to 15: approximately 10000K (500K steps),
16: approximately 5600K, 17: approximately 9300K, 18: approximately 3200K,
From 19: approximately 10500K to 28: approximately 15000K (500K steps)
“ERR” when WHBL is not set to 1.
USER R-CONTRAST CRTR WR 0-256 0-256 “ERR” when WHBL is not set to 2.
G-CONTRAST CRTG WR 0-256 0-256
B-CONTRAST CRTB WR 0-256 0-256
R-OFFSET OFSR WR -127-127 -127-127
G-OFFSET OFSG WR -127-127 -127-127
B-OFFSET OFSB WR -127-127 -127-127
COPY TO USER CPTU W 0 Copies a preset value to the user setting.
GAMMA GAMM WR 0-2, 5-9 0-2, 5-9 0: 1.8, 1: 2.2, 2: 2.4, 5:2.0, 6:STD, 7:LIGHT 2, 8:LIGHT 1, 9:DARK
C.M.S.-HUE
CMHR WR -10-10 -10-10 R
CMHY Y
CMHG G
CMHC C
CMHB B
CMHM M
CRST W 1 Resets the hue.
C.M.S.-SATURATION
CMSR WR -10-10 -10-10 R
CMSY Y
CMSG G
CMSC C
CMSB B
CMSM M
CRST W 2 Resets the saturation.
ADVANCED AUTO
AGIN W 1 When the input mode is D-SUB. -
ANALOG GAIN
ANGA WR 0-127 0-127 When the input mode is D-SUB.
○
ANALOG OFFSET
ANOF WR 0-127 0-127 When the input mode is D-SUB.
NR
TDNR WR 0-2 0-2 0: OFF, 1: LOW, 2: HIGH
RGB INPUT RANGE INPR WR 0-2 0-2 0: AUTO, 1: FULL, 2: LIMITED
When the input mode is D-SUB or APPLICATION, the value 0 is invalid.
DISPLAY COLOR PATTERN PTDF WR
0 0 No pattern display.
-
1 1 White single color pattern display.
2 2 Red single color pattern display.
3 3 Green single color pattern display.
4 4 Blue single color pattern display.
99 99 Red/green/blue mixed color pattern display.
Set each color's level with PTDR, PTDG, PTDB.
DISPLAY COLOR PATTERN (R) PTDR WR 0-255 0-255 Set the R, G, and B levels of the mixed color pattern.
“ERR” when PTDF is not set to 99.
DISPLAY COLOR PATTERN (G) PTDG WR 0-255 0-255
DISPLAY COLOR PATTERN (B) PTDB WR 0-255 0-255
DISPLAY COLOR PATTERN
(LEVEL) PTDL WR 0-255 0-255 Set the white, red, green, and blue levels of the single color pattern.
“ERR” when the DISPLAY COLOR PATTERN is set to a color other than
white, red, green, or blue.
HDR
HDRS WR 0-1 0-1 0: OFF, 1: ON
RESET ARST W 2
Controlling the Monitor with a computer (RS-232C)