Sharp PN-HB651, Руководство по эксплуатации

Страница: 48 / 57

48
E
Initialization/Functional Restriction Setting (FUNCTION) menu
Function Command Direction Parameter Reply Control/Response contents *
ALL RESET RSET W 0-1 0: ALL RESET 1, 1: ALL RESET 2 -
ADJUSTMENT LOCK ALCK WR 0 0 OFF
●
W 1-2 1: ON 1, 2: ON 2
○
R 1-2 1: ON 1, 2: ON 2
●
ADJUSTMENT LOCK TARGET ALTG WR 0-2 0-2 0: REMOTE CONTROL, 1: MONITOR BUTTONS, 2: BOTH
○
OSD DISPLAY LOSD WR 0-2 0-2 0: ON 1, 1: OFF, 2: ON 2
LED OFLD WR 0-1 0-1 0: ON, 1: OFF
TEMPERATURE ALERT TALT WR 0-2 0-2 0: OFF, 1: OSD & LED, 2: LED
STATUS ALERT SALT WR 0-2 0-2 0: OFF, 1: OSD & LED, 2: LED
POWER BUTTON PBTN WR 0-1 0-1 0: MONITOR, 1: EXT. CONTROLLER
EXTERNAL CONTROLLER INPUT PCIP WR 0-3 0-3 0: D-SUB, 1: DisplayPort, 2: HDMI1, 3: HDMI2
“ERR” when MONITOR is selected for POWER BUTTON.
SIGNAL RESPONSE LEVEL HDUC WR 1-200 1-200
APPLICATION APST WR 0-1 0-1 0: DISABLE, 1: ENABLE
-
APPLICATION RECOVERY MODE APRV W 0 Display the menu for APPLICATION mode recovery
Others
Function Command Direction Parameter Reply Control/Response contents *
SIZE (Screen size selection) WIDE WR 1-4 1-4 1: WIDE, 2: NORMAL, 3: Dot by Dot, 4: ZOOM
○
INFORMATION Model INF1 R Value
●
Serial no. SRNO R Value
Temperature sensor DSTA R 0 Internal temperature normal
1 Internal temperature abnormal has occurred and the monitor is in standby
mode
2 Internal temperature abnormal occurred (To delete the information of
temperature abnormal, turn off the main power.)
3 Internal temperature abnormal has occurred and backlight brightness is
dimmed
4 Temperature sensor abnormal
Temperature acquisition ERRT R Value Returns the temperature at the temperature sensors.
Indicates a temperature sensor abnormality when “126” is returned.
○
Cause of last standby mode STCA W 0 Initialization
●
R 0 No detectable error has occurred
1 Standby mode by POWER button or MONITOR OFF button
2 Main power off by the main power switch
3 Standby mode by control via RS-232C, LAN, or application
4 Input signal waiting mode by No Signal
6 Standby mode by abnormal temperature
8 Standby mode by SCHEDULE setting
10 Standby mode by HDMI CEC
20 Standby mode by OFF IF NO OPERATION setting
FREEZE FRMD WR 0-1 0-1 0: FREEZE release, 1: FREEZE execute -
LAN setup FTP ON/OFF select FCHE WR 0-1 0-1 0: FTP connection OFF, 1: FTP connection ON
“ERR” when DISABLE is selected for APPLICATION.
○
FTP Username FUSR WR XXXXXXXX XXXXXXXX 8 characters or less; half-width alphanumeric characters, “-”, and “_”.
(The field cannot be left blank, and spaces cannot be entered.)
“ERR” when DISABLE is selected for APPLICATION.
FTP Password FPAS WR XXXXXXXX XXXXXXXX 8 characters or less; half-width alphanumeric characters, “-”, and “_”.
(The field cannot be left blank, and spaces cannot be entered.)
“ERR” when DISABLE is selected for APPLICATION.
Controlling the Monitor with a computer (RS-232C)