Sharp PN-HB651 страница 28 Скачать руководство пользователя

Страница: 28 / 57

Menu Items

AUDIO OPTION
AUDIO OUTPUT

Sets the volume of sound output from the audio output terminal.

VARIABLE1 ........ You can adjust the volume from the speakers of this monitor and the audio output terminal simultaneously

by using VOLUME.

VARIABLE2 ........ You can adjust the volume from the audio output terminal by using VOLUME.

Sound will not be output from the speakers of this monitor.

FIXED................. Fixes the volume from the audio output terminal. Adjust the volume by using an external device.

AUDIO INPUT LEVEL

Selects the maximum audio input level of the audio input terminal.

MONAURAL AUDIO

Outputs audio signals as monaural.

START INPUT MODE

You can set the input mode that will be in effect when the power is turned on.

When this is set to LAST INPUT MODE, the input mode when the power was last turned off will appear.

* When NO SIGNAL AUTO INPUT SEL. is ON and there is no input signal in the set input mode, the input mode will change

to the input mode that has an input signal.

COMMUNICATION SETTING
MONITOR CONTROL SELECT (when APPLICATION is ENABLE)

RS-232C ............ Select to control this monitor by RS-232C.

LAN .................... Select to control this monitor by LAN.

APPLICATION .... Select to control from the application of APPLICATION mode, such as e-Signage.

BAUD RATE

Selects the communication speed used for RS-232C communication.

ID SETTING
ID No. SET

Assigns ID numbers to monitors connected in a daisy chain (see page 38), using the RS-232 cables.

The numbers 1 to 255 are available for ID numbers.

If “0” is set, the system regards this as the state where no ID number is set.

AUTO ASSIGN ID No.

ID No. to be used will be automatically assigned when multiple monitors are connected with RS-232C.

Select ON, then press the ENTER button.

Perform operations using the first monitor in the daisy chain.

REMOTE No.

Sets the number of the remote control unit. (See page 35.)

MONITOR

PORTRAIT/LANDSCAPE INSTALL

LANDSCAPE ......Landscape orientation

PORTRAIT .........Portrait orientation

HORIZONTAL INSTALLATION

OFF ....................Portrait/landscape installation.

FACE UP ............The display screen faces up.

ROTATE 180°

If video is upside down when the monitor is installed in portrait orientation, you can rotate the video 180 degrees.

Interlaced signals may not be displayed properly.

OSD H-POSITION

Adjusts the horizontal display position of menu screen.

OSD V-POSITION

Adjusts the vertical display position of menu screen.

Содержание PN-HB651


























































Результаты поиска

Содержание PN-HB651

Отзывы:

Похожие инструкции для PN-HB651

Бренды по названию

Популярные бренды

Sharp PN-HB651, Руководство по эксплуатации

Результаты поиска

Содержание PN-HB651

Отзывы:

Похожие инструкции для PN-HB651

Бренды по названию

Популярные бренды