Sharp PN-HB651 страница 36 Скачать руководство пользователя

Страница: 36 / 57

Initialization (Reset)/Functional Restriction Setting (FUNCTION)

You can reset the settings to the factory default settings or

restrict operations.

1. Press the FUNCTION button, and then press the MENU

button within 10 seconds.

▲

▲▲

▲

▲▲

▲

OFF

ON 1

MONITOR

LED

OFF

FUNCTION

ALL RESET

ADJUSTMENT LOCK

ADJUSTMENT LOCK TARGET

OSD DISPLAY

UNLOCKED

RS-232C/LAN

LED

TEMPERATURE ALERT

STATUS ALERT

POWER BUTTON

EXTERNAL CONTROLLER INPUT

SIGNAL RESPONSE LEVEL

APPLICATION

OK:[ENTER] END:[RETURN]

APPLICATION RECOVERY MODE

UPDATE MAIN SOFTWARE

2. Select and set the items.

ALL RESET

Resets the settings to the factory default settings.

Press the ENTER button, select the resetting method,

and then press the ENTER button.

After initialization, turn the main power switch off and

then back on.
ALL RESET 1:

Resets all the settings to the factory default settings.

In APPLICATION mode, only the settings of the

factory-installed applications are initialized.

ALL RESET 2:

Returns the settings to the factory default settings.

However, the following items are not returned:

ID No. SET, REMOTE No., MONITOR CONTROL

SELECT, BAUD RATE, APPLICATION

(see pages 28 and 37.);

the applications of APPLICATION mode also are not

returned.

ADJUSTMENT LOCK

You can disable operations on the monitor and the

remote control unit that use buttons.

OFF ...Enables operation.

ON 1 ..Disables all operations other than turning power

on/off and FUNCTION.

ON 2 ..Only the FUNCTION operation is enabled.

Disables all operations other than FUNCTION (not

even power on/off).

ADJUSTMENT LOCK TARGET

Sets the target to prohibit operation of with

ADJUSTMENT LOCK.

REMOTE CONTROL ..... Prohibits remote control

operation

MONITOR BUTTONS ... Prohibits monitor button

operation

BOTH ............................. Prohibits remote control and

monitor button operation

RS-232C/LAN

Specifies whether to allow control via RS-232C or LAN.

(See pages 38 and 49.)

OSD DISPLAY

Shows/hides the menu, modes and messages.

The FUNCTION screen cannot be hidden.

ON 1 .............. Shows all menus, modes and messages.

ON 2 .............. Hides messages automatically displayed

by the display. Shows messages during

operation.

OFF ............... Hides all menus, modes and messages.

LED

Specifies whether to light the power LED.

TEMPERATURE ALERT

Selects the notification method for an abnormal

temperature.

OFF ................ Do not notify about an abnormal

temperature.

OSD & LED .... When an abnormal temperature is

detected, the power LED flashes in red

and green alternately and the screen

displays a message: TEMPERATURE.

LED................. When an abnormal temperature is

detected, the power LED flashes in red

and green alternately.

STATUS ALERT

Selects the notification method for a hardware error.

OFF ................ Do not notify about the error.

OSD & LED .... When a hardware error is detected, the

power LED flashes in red and the screen

displays a message: STATUS [xxxx].

LED................. When a hardware error is detected, the

power LED flashes in red.

POWER BUTTON

Normally, leave this setting as MONITOR.

When using an optional part, if instruction appears,

change the setting accordingly.

EXTERNAL CONTROLLER INPUT

Normally, you do not need to change this setting.

When using an optional part, if instruction appears,

change the setting accordingly.

SIGNAL RESPONSE LEVEL

Normally, you do not need to change this setting. Use

this option to set the level of response to signal changes.

Содержание PN-HB651


























































Результаты поиска

Содержание PN-HB651

Отзывы:

Похожие инструкции для PN-HB651

Бренды по названию

Популярные бренды

Sharp PN-HB651, Руководство по эксплуатации

Результаты поиска

Содержание PN-HB651

Отзывы:

Похожие инструкции для PN-HB651

Бренды по названию

Популярные бренды