Sharp PN-C603D страница 96 Скачать руководство пользователя

Страница: 96 / 139

Editing sheets from thumbnails (full screen view only)

When a thumbnail on the sheet list is selected, the menu appears.

Copy:

Copies the selected sheet to the clipboard.

Duplicate:

Copies the selected sheet to the right side.

Delete:

Deletes the selected sheet.

Touch “Yes” in the confirmation dialog box that appears

Print:

Prints the selected sheet.

Save PDF:

Converts the selected sheet to PDF and saves the sheet.

Send Email:

Converts the selected sheet to PDF and sends it as an e-mail attachment.

Select All Sheets: Selects all sheets.

If touched when all sheets are already selected, selection of all sheets will be canceled.

Properties:

Use to change the settings of the selected sheet.

Whiteboard: The background color, background image (image file used, show/hide, display

method), and sheet size* (page 23) can be set.

* Full version only.

Overlay board: You can set whether the desktop is captured and used as the background image when

the sheet display is changed or moved.

TIPS

• You can also select and use multiple sheets.

Touch the bar ( ) before or after the sheet to display the following menu.

Add Sheet:

Adds a sheet to the selected position.

Paste:

Pastes a sheet copied to the clipboard on the selected position.

Содержание PN-C603D












































































































































Результаты поиска

Содержание PN-C603D

Отзывы:

Похожие инструкции для PN-C603D

Бренды по названию

Популярные бренды

Sharp PN-C603D, Руководство пользователя

Результаты поиска

Содержание PN-C603D

Отзывы:

Похожие инструкции для PN-C603D

Бренды по названию

Популярные бренды