Sharp PN-C603D страница 84 Скачать руководство пользователя

Страница: 84 / 139

Floating menu

The menu can be moved to any position.

To move the menu, drag the background.

Title bar

is linked to pin / unpin.

Touch to minimize the menu and show only the title bar. (Not pinned)

When the menu is minimized, touch to return the menu to its original state. (Pinned)

When set to unpin on the tool bar, the menu is minimized.

Touch to return the menu to its original state pinned.

Touch to change the tool bar to horizontal display. The tool bar changes between vertical

and horizontal display each time this is touched.

TIPS

• The menu icon types that appear by default are the same as in the square menu and classic menu.

• In floating menu, 1 menu is used for the settings, even when using multiple pens. When using multiple pens, the line colo

and thickness are the same for all pens.

Setting to floating menu

1. Touch the “Settings” button (

) on the toolbar.

2. Select “Floating Menu” in “Menu”.

To return to the normal menu, select “Square Menu”.

Содержание PN-C603D












































































































































Результаты поиска

Содержание PN-C603D

Отзывы:

Похожие инструкции для PN-C603D

Бренды по названию

Популярные бренды

Sharp PN-C603D, Руководство пользователя

Результаты поиска

Содержание PN-C603D

Отзывы:

Похожие инструкции для PN-C603D

Бренды по названию

Популярные бренды