Sharp PN-C603D, Руководство пользователя, Страница: 57 / 139

Touch action
Rotate
Use this action in a screen that is capable of image rotation.
Touch the center point of the rotation with one finge . While
holding that finger still, move another finger in the desire
direction of rotation.
With one finger touchin
Move another finger in the
desired direction of rotation
TIPS
• The screen may not respond correctly in the following cases:
Touch gesture is too quick
The distance between the two points is too short
The two points intersect
• Operation with the touch pen is not possible.
Touch Pen
Pen tip
TIPS
• If the pen tip becomes worn or damaged, replace it.
To purchase a new pen tip, consult your dealer.
Other functions
In Windows 8/8.1, input panel functions can be used.
In Windows 7, touch pointer and input panel functions can be
used.
For information on these functions, see Windows Help.
Touch pointer :
A translucent image of a mouse appears near the point
touched. The left/right buttons of the image can be clicked
to perform the same actions as left/right clicking a mouse.
Input panel :
A software keyboard and an input panel with handwriting
recognition appear on the screen.
Windows 8/8.1 and Windows 7 (excluding Starter), the ink
function of Microsoft Office can be used
Handwritten comments can be written, and handwriting can
be recognized.
For details, see Microsoft Office Help
Cautionary points
• Do not use the touch pen for any purpose other than touch
panel operation.
• Do not press hard on the pen tip.
• Operation will not take place correctly if there is an obstacle
between the infrared transmitter/receiver and the touch pen
or your finge . Operation will not take place correctly if your
fingers or your sleeve is near the screen
• If the touch pen is held too flat against the screen, th
touch position may not be correctly detected.
• If the touch pen does not work at the edge of the screen,
move it slowly.
• This may not operate correctly if there is an inverter
fluorescent light nearb .
• If there is dirt or foreign matter on the tip of the touch pen,
remove it. Foreign matter may damage the screen.
• The touch pen position may occasionally deviate in the
login screen. In this case, use the keyboard or mouse.
• If the USB cable becomes disconnected, the touch
panel may not operate correctly after the USB cable is
reconnected. In this case, restart the computer.
• When removing the pen tip or your finger from the screen
remove a sufficient distance. If the distance is not sufficien
a touch may be detected even if the screen is not touched.
• Calibration (position alignment) is performed automatically.
Eraser
The eraser is used with the Pen Software. For the procedure for
using the eraser, refer to the Pen Software Operation Manual.
Caution
• When using the eraser, gently bring the cloth side into
contact with the screen. Touching the screen with one of
the non-cloth sides will damage the screen.
• If there is any dirt or foreign matter on the surface that contacts
the screen, remove it. Foreign matter may damage the screen.