Sharp PN-C603D страница 50 Скачать руководство пользователя

Страница: 50 / 139

Connecting Peripheral Equipment

Caution

• Be sure to turn off the power and disconnect the plug from

the power outlet before connecting/disconnecting cables.

Also, read the manual of the equipment to be connected.

• Be careful not to confuse the input terminal with the output

terminal when connecting cables. Accidentally reversing

cables connected to the input and output terminals may

cause malfunctions and the other problems.

• Do not use any cable that has a damaged or deformed

terminal. Using such cables may cause malfunctions.

TIPS

• When using the touch panel, connect the USB cable to the

computer.

• Images may not be displayed properly depending on the

computer (video card) to be connected.

• Use the automatic screen adjustment when a computer

screen is displayed for the first time using PC (INPUT6), o

when the setting of the computer is changed. The screen is

adjusted automatically using AUTO SYNC. in SCREEN of

the OTHERS menu.

• If the audio output from the playback device is connected

directly to speakers or other devices, the video on the

monitor may appear delayed from the audio portion.

Audio should be played through this monitor by connecting

the playback device to the monitor’s audio input, and

connecting the monitor’s audio output to the speakers or

other devices.

1. HDMI1 input terminal (INPUT1)

2. HDMI2 input terminal (INPUT2)

3. HDMI3 input terminal (INPUT3)

• Use a commercially available HDMI cable (conforming to

the HDMI standard).

• To input only video by HDMI and input audio by

analog, connect to the HDMI2 input terminal and select

HDMI+ANALOG in AUDIO SELECT of the OTHERS

menu. When HDMI is selected, connection to the audio

input terminal is unnecessary.

4. D-sub input terminal (INPUT6)

5. Audio input terminal (for INPUT2/INPUT6)

• Use an audio cable without resistance.

6. AV component input terminals (INPUT4)

• This can be used as an AV video input terminal.

Connect to the [VIDEO] input terminal, and change INPUT

SELECT to VIDEO of the OTHERS menu.

7. AV video input terminal (INPUT5)

8. Audio input terminal (for INPUT5)
9. USB cable

• To use the touch panel, the monitor must be connected to

a computer using the USB cable.

10. RS-232C input terminal

• You can control the monitor from a computer by

connecting a commercially available RS-232 cross cable

between this terminal and the computer.

11. Audio input terminal (for INPUT4)
12. Audio output terminal

• The output sound varies depending on the input mode.

6
7

Содержание PN-C603D












































































































































Результаты поиска

Содержание PN-C603D

Отзывы:

Похожие инструкции для PN-C603D

Бренды по названию

Популярные бренды

Sharp PN-C603D, Руководство пользователя

Результаты поиска

Содержание PN-C603D

Отзывы:

Похожие инструкции для PN-C603D

Бренды по названию

Популярные бренды