Sharp MX-M1054 Скачать руководство пользователя страница 70

Страница: 70 / 76

Repair Hints

SHARP

Document Solution Centre

DOCUMENT FILING / PUBLIC FOLDER

ALL

Unable to browse the NAS/Public

Folder, even though the Public

Folder/NAS settings are enabled within

the Network Settings menu.

The NBT/WINS Port (Security setting) must be enabled to

use NAS/Public storage. For security measures, this port

setting is disabled as default.

Can you use Domain User Accounts to

browse the NAS/Public Folders?

NAS/Public Folders support local accounts only

(programmed on MFP)

TROUBLE CODES

ALL

E7-48 after MX-EB11 installation

To support the MX-M904/1054/1204 series, upgrade the

MX-EB11 (ACRE) firmware to 04.00.A1 (or higher)

MX-LC13

U6-54 after installing two MX-LC13s

To support the installation of two MX-LC13, upgrade the

MX-LC13 firmware to v01.05.S1 (or higher)

GENERAL / MISC

ALL

Unable to perform Pamphlet Copy with
Saddle Stitch or C-Fold, Accordion Fold,

Half Fold or Double Fold output using

Copy mode only, even though the

required output options are installed

Ensure the Original Feeding Mode for Copy is NOT set for

Mixed Size Documents.

Check Settings – Device Control or Others menu.

MX-LC13

"Check The Connection Between The

Main Unit And The Paper Pass Unit"

(Copy Mode) or “Paper Empty” (Print

Mode) messages when selecting paper

feed from the LCT.

Ensure the screw that is used to lock the MX-LC13 to the

main body is loose. If this screw is left tight, the locking

mechanism will not work and the locking sensor will not

be actuated.

MX-FX11

What is the function of the Digital Line

Network checkbox?

In past examples, when connecting the FAX machine to an

IP telephone network, if the outgoing signal level was

high, communication trouble frequently occurred.

Because of the above, there were many cases where

technicians had to adjust the outgoing signal level via FAX

Soft SW when this occurred.

For this reason, the above setting has been added to

avoid communication trouble when connected to an IP
telephone network. This setting can be changed within

the MFP web page by the administrator.

System Settings –> Image Send Settings –> Fax Settings –>

Default Settings.

When Digital Line Network is enabled (ticked), the signal

outgoing level of FAX is set to -15dBm

When using the LCD panel to change

System Settings, only Top Page and

System Settings are listed within the

menu.

Go to the service webpage

http://IP_Address_of_MFP/service_login.html.

Default Username & Password= "service".

Select "Administration Settings" and execute "All" to

display all the settings.

Содержание MX-M1054













































































Результаты поиска

Содержание MX-M1054

Отзывы:

Sharp MX-M1054, Техническое справочное руководство, Страница: 70 / 76

Результаты поиска

Содержание MX-M1054

Отзывы: