Sharp MX-M1054, Техническое справочное руководство, Страница: 47 / 76

Test Simulation
SHARP
Document Solution Centre
47
44
Process Control Data
3 OPC drum surface potential detection
check
4 Process control initial density setup
5 Dark potential adjustment setting
6 High density process control correction
9 Process control data display
12 DM data, patch/base data display
14 Fuser temp.& humidity output data
15 OPC drum idle rotation setting
21 Half tone process control registration
22 Half tone process control patch result
24 Half tone correction data result display
25 Initial half tone correction data display
26 Half tone process control execution
27 Half tone process control correction clear
28 Process control timing (On/Off) setting
29 Enable/disable half tone correction during
each job
33 Half tone potential adjustment correction
(force)
35 Half tone potential data display
37 DV bias correction level setting for
continuous print mode.
62 Process control execution condition setting
46
Copy & Image Density Adjustment
2 Monochrome copy density adjustment
4 Colour scanner density adjustment
5 Scanner density adjustment
8 Colour scanner balance adjustment RGB
9 Scan image density adjustment
10 Engine grey balance & gamma manual
adjustment
16 Monochrome copy density & gamma
adjustment
19 Monochrome auto exposure mode setup
23 Enable/disable maximum density adjust.
24 Engine half tone auto adjustment
32 Document background density adjust.
37 B/W image reproduction adjustment
39 Fax Image send sharpness adjustment
40 Fax mode exposure adjust (All modes)
41 Fax mode exposure adjust (Normal)
42 Fax mode exposure adjust (Fine Text)
43 Fax mode exposure adjust (Super Fine)
44 Fax mode exposure adjust (Ultra Fine)
45 Fax mode exposure adjustment (600dpi)
46
Copy & Image Density Adjustment
46 Fax mode exposure adjustment (RGB RIP)
47 JPEG compression rate setting
48 Copy output resolution setting
51 Heavy paper mode gamma adjustment
52 Heavy paper mode gamma default set
54 Half tone density adjustment (dither).
55 Drop out colour mode adjustment for
Image Send mode.
60 Sharpness adjustment (colour auto mode)
61 Area separation recognition setting
62 ACS operating condition setting
63 Copy low density adjustment
66 Watermark adjustment for Copy/Printer
74 Copy colour balance adjustment
90 Set process operation of high compression
PDF images
91 Adjust reproduction of black text.
48
Magnification & Motor Adjustment
1 Scan image magnification ratio adjust
(Main scan)
5 Scan image magnification ratio adjust (Sub
scan)
6 Motor rotation speed adjustment
49
Firmware & E-Manual Upgrade
1 Firmware Upgrade Program
3 E Manual Update Program
5 Watermark Update Program
50
Image Position Adjustment
1 Lead edge/copy position adjustment
2 Lead edge/copy position adjustment (Calc)
5 Printer lead edge adjustment (sub scan)
6 DSPF Lead edge/copy position adjustment
7 DSPF Lead edge/copy adjustment value
10 Print off-centre deviation adjustment.
12 Original centre deviation adjustment.
20 Manual colour registration adjust.
27 Image loss adjustment (Fax/Scanner)
28 Service adjustment (OC/SPF position)
51
Resist Roller Adjustment
1 Secondary transfer voltage ON timing
adjustment
2 Resist roller adjustment