MD-X8H
– 12 –
How to remove the sled motor/loading motor
(See Fig. 12-4)
1. Remove the screws (D1) x 4 pcs., and remove the sled
motor/loading motor.
Caution:
Be careful so that the gear is not damaged.
(The damaged gear emits noise during searching.)
Figure 12-4
Sled
Motor
Loading
Motor
(D1)x2
Ø1.7x2mm
(D1)x2
Ø1.7x2mm
REMOVING AND REINSTALLING THE MAIN PARTS
MD MECHANISM SECTION
Perform steps 1 to 3 of the disassembly method to remove the
MD mechanism.
How to remove the magnetic head
(See Fig. 12-1)
1. Remove the screws (A1) x 1 pc.
2. Remove the solder joint (A2) x 2 connecting the magnetic
head to the head relay flexible board.
Caution:
Take utmost care so that the magnetic head is not damaged
when it is mounted.
How to remove the cartridge holder
(See Fig. 12-2)
1. Open the rpller arm lever in the arrow direction, and lower
the clamper lever to the rear side.
2. Apply +5V to the red line side of blue connector of loading
motor, push the rack gear in the arrow direction to move the
cam plate lever until tick is heard.
3. Remove the screw (B1) x1 pc., and the spring (B2) x1 pc.,
fitted to the holder arm, and shift the cartridge holder to the
left side to remove it.
How to remove the mechanism switch PWB
(See Fig. 12-3)
1. Remove the screws (C1) x 2 pcs., and remove the mechanism
switch PWB.
Figure 12-1
Figure 12-2
Figure 12-3
MD Mechanism
(A1)x1
ø1.7x5mm
Magnetic Head
(A2)
Soldering x2
Soldering
x2
Slider Lever
Cartridge Holder
Clampa Lever
Lack Gear
Roller Arm Lever
Loading Motor
Cam Plate Lever
(B1) x1
Ø1.7x5mm
(B2) x1
(C1)x1
Ø1.7x3mm
(C1)x1
Ø1.7x9.5mm
MD Mechanism
Switch PWB
Содержание MD-X7H
Страница 28: ...MD X7H MEMO 18 ...
Страница 29: ...MD X7H MEMO 19 ...