Sharp LC60LX849H Скачать руководство пользователя страница 81

Страница: 81 / 102

Other useful features

You can connect the TV to a USB memory device,

USB hard disk drive (HDD) or home network server

to enjoy viewing pictures, listening to music, and

watching videos.

The USB memory device can also be used

for recording.

NOTE

• Depending on the USB memory device/USB hard disk

drive (HDD)/home network server, the TV may not be able

to recognise the recorded data.

• It may take time to read the recorded data if the USB

memory device/USB hard disk drive (HDD)/home network

server contains many files or folders.

• Use only alphanumeric characters for naming files.

• File names over 80 characters (may vary depending on

character set) may not be displayed.

• External subtitles for some video files may not be

supported.

• Partitioned USB hard disk drives are not supported.

Therefore, use only USB hard disk drives that are not

partitioned.

• Only compatible file formats are displayed.

USB recording

You can enjoy D-TV recording or playback by

connecting a commercially available USB HDD to the

TV.

• USB recording does not work for A-TV, external inputs,

data broadcasts, radio broadcasts or network applications.

Connecting a USB HDD

Connect a commercially available USB HDD to the

USB port of the TV.

• USB storage device: USB HDD

• USB HDD is recommended to connect to USB 3(HDD)

terminal.

• Be sure to read the operation manual for the USB HDD.

• At least USB HDDs with memory between 100GB and 2TB

and under are required for USB recording to register.

• Refer to Disconnect the USB HDD when removing the USB

HDD (do not remove the USB HDD during USB recording

operation).

• USB recording may take a while to start after the TV is

turned on.

• This function may not work properly for some USB HDDs.

• Do not connect and disconnect a USB HDD from the TV

repeatedly.

USB HDD registration

It is necessary to first perform USB HDD registration

for USB HDDs used for USB recording.

Directly connect only one USB HDD to the USB port while

registering the USB HDD (when two or more USB HDDs are

connected, USB HDD registration is not available).

• The screen prompt pops up.

When the USB HDD is connected to the TV

instructions to register the USB HDD.

NOTE

• Only one USB HDD for USB recording can be registered on

the TV. Two or more USB HDDs for USB recording cannot

be used at the same time.

• When a USB HDD is registered, formatting may be

performed. In that case, all data will be deleted.

Disconnecting the USB HDD

When you disconnect the USB HDD, be sure to the following

steps.

Go to “TV Menu”> “Setup”> “View setting”> “USB

REC setting”> “Device removal”.

• This menu item cannot be selected when a USB HDD for

USB recording is not registered.

• The USB HDD registration for USB recording is cancelled

in the following cases:

− When the USB HDD is removed.

−

When another USB HDD is registered for USB recording;

only one USB HDD can be registered for USB recording.

NOTE

Содержание LC60LX849H







































































































Результаты поиска

Содержание LC60LX849H

Отзывы:

Бренды по названию

Популярные бренды

Sharp LC60LX849H, Руководство по эксплуатации

Результаты поиска

Содержание LC60LX849H

Отзывы:

Бренды по названию

Популярные бренды