77
Network function
Press the WPS button on the router/access
point. When you press the WPS button, a
progress bar will appear on the display. Wait until
the connection is established.
Select “OK” when the connection details are
displayed.
• If you have failed to connect to the internet in
the above operation, an error message will
appear.
5
6
Select “Next” to proceed.
Go to “Wireless setup”
s
"Change", and then
press
ENTER
.
Press
a
/
b
to select “WPS push button”, and
then press
ENTER
.
$POOFDUJPOUZQF
8JSFMFTTTFUVQ
3FHJTUFSTUIFXJSFMFTTOFUXPSL1MFBTFTFMFDU
IPXUPDPOOFDU
814QVTICVUUPO
8141*/DPEF
4FMFDUJOHXJSFMFTTOFUXPSL
3FHJTUFSJOHXJSFMFTTOFUXPVL
*1TFUVQ
57<
4FUVQ7JFXTFUUJOH/FUXPSLTFUVQ-"/TFUUJOH
>
• If your router/access point does not support WPS
(Wi-Fi Protected Setup), select “Selecting wireless
network” and follow the on-screen instructions and
the operation manual of the router/access point.
• To establish the connection manually, select
“Registering Wireless network”. Follow the on-
screen instructions and the operation manual of
the router/access point.
• To establish the connection manually, select “WPS
PIN code”. Follow the on-screen instructions and
the operation manual of the router/access point.
1
4
2
3
NOTE
• To connect your TV to the internet, you must have a
broadband internet connection.
• If your access point is set to a stealth mode (that
prevents detection by other devices), you may not
be able to establish a connection. In this case,
disable the stealth mode on the access point.
• If you want to change the IP settings manually, go
to “Menu”
s
“Setup”
s
“View setting”
s
“Network
setup”
s
“IP setup” and follow the on-screen
instructions and the operation manual of the router.
• As there are lot of formats in the internet, some
formats may not be supported by this TV unit.
Go to "Menu"
s
"Setup"
s
"View setting"
s
"Network setup"
s
"LAN setting"
s
"Manual
setup"
s
"Yes".
"Connection type"
s
"Wireless"
s
"OK".
Press
a
/
b
to select “Easy setup”, and then
select "Yes", press
ENTER
.
Select "Wired" or "Wireless", and then press
ENTER
.
1
1
2
3
Go to "Menu"
s
"Setup"
s
"View setting"
s
"Network setup"
s
"LAN setting".
Go to "Menu"
s
"Setup"
s
"View setting"
s
"Network setup"
s
"LAN setting".
2
Press
a
/
b
to select “Manual setup”, and then
select "Yes", press
ENTER
.
• Go to "Connection type"
s
"Wired"
s
"OK".
3
Press
a
/
b
to select “IP setup”, press
ENTER
,
select "change" and then press
ENTER.
Select “OK” , and then select “Finish”.
• If you have failed to connect to the Internet
in the above operation, an error message will
appear.
4
• Set “Get the IP address automatically” and
“Get the DNS address automatically” to
“Yes”, to finish the network setup.
• The wired network is now established
automatically. If you want to manually
change the settings, go to “Menu”
s
“Setup”
s
“View setting”
s
“Network setup”
s
“LAN setting”
s
“IP setup” and follow the
on-screen instructions and the operation
manual of the router.
(FUUIF*1BEESFTT
BVUPNBUJDBMMMZ
:FT
/P
---
---
---
---
---
---
---
---
---
---
---
---
*1BEESFTT
/FUNBTL
(BUFXBZ
/FYU
$POOFDUJPOUZQF
8JSFMFTTTFUVQ
*1TFUVQ
57<
4FUVQ7JFXTFUUJOH/FUXPSLTFUVQ-"/TFUUJOH
>
Wireless installation
Wired installation
• Follow the on-screen instructions to complete the
network setup.
• A connection test is performed after the setup is complete.
NOTE
• For instructions on how to check whether your
router supports the WPS function and how to locate
the WPS button, see the main body of your router or
refer to its operation manual.
w
Manual setup
• You can select the connection type (wired/wireless),
choose the wireless setup mode, and set the IP
address.
• Follow the on-screen instructions to complete the
network setup.
w
Connection test
•
You can test the network connection status.
NOTE
• Successfully passing the connection test does not
guarantee that you can connect to all third-party services.
w
Easy setup
Only the WPS mode is available for wireless connection
setup. “Manual setup” is possible for other wireless
connections.
