13
Preparation
H
LC-60LX650H
1
3
2
②
①
①
TOP-MIDDLE
FRONT
③
Soft cushion
NOTE
• When installing the stand, you need to put your TV on a flat
surface. Before that, put a soft
cushion on the surface.
• The angle of the stand is not adjustable.
• To detach the stand unit, perform the steps in reverse
order.
• A screwdriver is not supplied with this product.
• During installation, please be careful to avoid getting your
hand trapped between the TV bottom and the floor.
Insert the base into the slot on the bottom
of the TV(while holding the base to avoid it
falling over).
Insert the four screws into the four holes on
the back of the TV, and tighten them.
1
Insert the supporting post into the foam
blocks TOP-MIDDLE, as shown in the
figure below.
2
As illustrated in the following figure,
attach the supporting post onto the stand.
3
Insert the eight screws into the eight
holes on the bottom of the stand, and
tighten them.
•
To install the stand correctly, hold the stand
with one hand securely, and tighten the
screws with the other hand.
