manualshive.com logo in svg

Sharp DX-C200, Руководство пользователя

Поделиться
Скачать
Sharp DX-C200 Скачать руководство пользователя страница 378

Error Code

Solution

4XXX21

Connection to the server failed while receiving an Internet Fax.

• Confirm that the network cable is properly connected to

the machine.

• Confirm that the network settings such as IP address,

DNS, and POP3 settings have been configured properly
(make sure that no double-byte character is used). See
p.324 "Configuring the Network Settings".

4XXX22

E-mail reception failed while receiving an Internet Fax.

• LIST command to the POP3 server failed. Ask the sender

to check the e-mail settings.

4XXX23

E-mail reception failed while receiving an Internet Fax.

• There was an error in the header of the e-mail. Ask the

sender to check the e-mail settings.

4XXX24

E-mail reception failed while receiving an Internet Fax.

• There was an error in the part header of the e-mail. Ask

the sender to check the e-mail settings.

• The e-mail had an invalid Content-Type, or an

unsupported type of file (such as PDF or JPEG) was
received. Ask the sender to check the file type.

4XXX25

E-mail reception failed while receiving an Internet Fax.

• There was an error in the text part of the part body of the

e-mail. Ask the sender to check the e-mail settings.

4XXX26

E-mail reception failed while receiving an Internet Fax.

• There was an error in the received TIFF file (which

resulted from a condition not indicated by the error codes
4XXX43 to 4XXX45). Ask the sender to check the TIFF
file.

4XXX42

E-mail reception failed while receiving an Internet Fax.

• There was an error in the part header of the e-mail. Ask

the sender to check the e-mail settings.

9. Troubleshooting

376

Содержание DX-C200

































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды