Sharp DV-NC55C, Руководство по обслуживанию

Страница: 51 / 128

51
DV-NC55U/C/M
YES YES NO NO NO NO
YES YES YES YES YES NO NO
PC 9V is not output. FLOW CHART NO.6
Check the secondary circuit, AT 12V and PC 12V switch(Q9053)
circuit.
Is voltage of 9V sent out from the pin(2) of IC9051?
Check for load circuit short-circuiting or leak.
Check the IC9051 periphery circuit. Are the "H" pulse inputted into the pin(9) of IC8201? Does the P-CON switch circuit is operate ally? (Q9056-7, Q9053, D9054, D9052, etc.)
Check each component and if poor the replace.
Replace IC8201.
Check or replace D9091-8.
FLOW CHART NO.7 Is 12V voltage supplied at pin(1) of IC9052?
Check the PC 12V line.
Is voltage of 8V sent out from the pin(2) of IC9052?
Check for load circuit short-circuiting or leak.
Check the IC9052 periphery circuit.
Replace IC9052.
Is 12V voltage supplied at pin(1) of IC9051?
PC 8V is not output.(PC 9V is possible)
FLOW CHART NO.8
Is 5V voltage supplied at emitter of Q9054?
Check the AT 5V line.
Is voltage of 5V sent out from the collector of Q9054?
Check for load circuit short-circuiting or leak.
Check the Q9054 periphery circuit.
Does the P-CON switch circuit is operate normally? (Q9056-7, D9054, D9053, etc.)
Check each component and if poor the replace.
Are the
"H" pulse inputted into the pin(9) of
IC8201?
Replace IC8201.
Check or replace D9091-8.
NO NO NO YES
YES YES YES YES NO
PC 5V is not output.
FLOW CHART NO.9
Is -19V voltage supplied at emitter of Q8202?
Check the AT -19V line.
Is voltage of -19V sent out from the collector of Q8202?
Check for load circuit short-circuiting or leak.
Check the Q8202 periphery circuit.
Are the
"H" pulse inputted into the pin(32) of
IC8201?
Does the P-CON switch circuit is operate normally? (Q8201, etc.)
Check each component and if poor the replace.
Replace IC8201.
Check or replace D9091-8.
FLOW CHART NO.10
Is 5V voltage supplied at pin(1) of IC9053?
Check the secondary circuit, AT 5V line.
Is voltage of 3.3V sent out from the pin(2) of IC9053?
Check for load circuit short-circuiting or leak.
Check the IC9053 periphery circuit.
Are the
"H" pulse inputted into the pin(9) of IC8201?
Does the P-CON switch circuit is operate normally? (Q9056-7, D9054, D9053, etc.)
Check each component and if poor the replace.
Replace IC8201.
Check or replace D9091-8.
NO NO NO NO NO NO YES YES
YES YES YES YES YES YES NO YES YES NO
PC -19V is not output.
PC 3.3V(1), (2) is not output.
FLOW CHART NO.11
Is 5V voltage supplied at pin(1) of IC9054? Is voltage of 2.5V sent out from the pin(2) of IC9054?
Check the secondary circuit, AT 5V line. Check for load circuit short-circuiting or leak.
Check the IC9054 periphery circuit.
Replace IC9054.
NO YES YES
YES
NO
PC 1.8V is not output.(PC 3.3V(1), (2) is possib
le)