AR-M207 M165 M162 SIMULATIONS 7-42
50
10
Paper off-center adjustment
Used to adjust the output area (main scanning direction) of scanned image data on paper.
When this simulation is executed, the selection window of the adjustment items and the current set value
are displayed.
Note 1: Items marked with (*) are displayed when TRAY2 and following options are not installed.
Note 2: When executing an adjustment copy from the manual paper feed (BYPASS) tray, set the following
paper according to the destination specification.
AB series
A3 paper
Inch series
Double Letter paper
The adjustment value is in the range of 1 - 99. (Default: 50)
When the adjustment value is increased, the output image is shifted to the right. When the adjustment value
is increased by 1, the image is shifted to the right by about 0.1mm.
Select an adjustment item (mode) with the cross key, and enter the set value with 10-key.
When [OK] key is pressed, the entered value is saved to the EEPROM and the machine shifts to the copy
execution window.
After completion of copying, the machine returns to the adjustment value input window.
When [START] key is pressed instead of [OK] key, the machine shifts to the copy execution window and
performs copying.
Default:
1
Main
code
Sub
code
Contents
Remark
(Adjustment item selection window)
Sim50-10 PRT. CENTER
1:TRAY1
2:TRAY2
3:TRAY3
1/2 [ 1- 99]
50
50
50
50
Sim50-10 PRT. CENTER
4:TRAY4
5:BYPASS
6:DUPLEX
2/2 [ 1- 99]
50
50
50
50
Display text
:Adjustment mode
1:TRAY1
:Print center offset (TRAY1)
2:TRAY2 (*)
:Print center offset (TRAY2)
3:TRAY3 (*)
:Print center offset (TRAY3)
4:TRAY4 (*)
:Print center offset (TRAY4)
5:BYPASS
:Print center offset (BYPASS)
6:DUPLEX (*)
:Print center offset (DUPLEX 2nd print surface)
Ready to copy.
S
100%
8 1/2
11
(Copy start window)
Copies in progress.
S
100%
8 1/2
11
(Copy execution window)
Adjustment
item selection
window
Copy start
window
Copy execution
window
OK
BACK
START
START
End of copy execution
[07]SIMULATIONS.fm 42
ページ
２００４年１１月１７日 水曜日 午後１２時１１分
