Sharp AR-M162, Руководство по обслуживанию

Страница: 68 / 134

AR-M207 M165 M162 SIMULATIONS 7-33
46 18 Image contrast adjustment (300dpi)
Used to set the contrast for each mode.
When this simulation is executed, the list of the setting items and the current set value are displayed.
Select an item to be changed with [ ] and [ ] keys, and enter an adjustment value with 10-key.
The setting range is 1 - 99. When [
] or [ ] key is pressed, the page can be changed.
When the set value is increased, the contrast becomes higher. When the set value is decreased, the
contrast becomes lower. Though copying is made only at density 3, the contrast levels at density 1 from
density 5 are also changed accordingly.
Enter an adjustment value and press [OK] key. The entered value is saved to the EEPROM and the machine
shifts to the copy window.
Sample copying can be performed during this simulation.
19 Exposure mode setting ( table setting/AE operation mode setting/Photo image process setting)
Used to set the following three items. Select an item with the UP/DOWN key of the cross key and enter a set
value with 10-key.
(1) :
table setting
(2) : AE operation mode
(3) : PHOTO image process setting
When this simulation is executed, the current set code number of the above three modes are displayed.
(1) AE MODE( table setting)
Used to set the priority operation mode of the AE mode. When the image takes priority regardless of the
toner consumption, set to 1. When the toner consumption must be suppressed regardless of image quality,
set to 2.
* If this setting is changed, SIM 46-30 returns to the default.
(2) AE STOP (AE operation mode)
Used to set the area for automatic exposure correction in image process.
(3) PHOTO (PHOTO image process setting)
Used to set the image process when the PHOTO mode is selected. Selection is available in the following two
modes:
Main
code Sub
code
Contents Remark
Window display : Adjustment mode
1:AE : AE MODE (300dpi)
2:TEXT : TEXT MODE (300dpi)
3:PHOTO 1 : PHOTO MODE (Error diffusion)
4:PHOTO 2 : PHOTO MODE (Dither)
5:TEXT (TS) : TS MODE (TEXT) (300dpi)
6:AE (TS) : TS MODE (AE) (300dpi)
Sim46-18 GAMMA SET.
1:AE
2:TEXT
3:PHOTO 1
1/2 [ 1- 99] 50
50
50
50
Sim46-18 GAMMA SET.
4:PHOTO 2
5:TEXT(TS)
6:AE(TS)
2/2 [ 1- 99] 50
50
50
50
Sim46-19 AE MODE
1:AE MODE
2:AE STOP
3:PHOTO
[ 1- 2]
1
0
1
1
Code number table setting
1 Priority on image quality (Default for Japan)
2 Priority on toner consumption (Default for EX Japan)
Code number AE operation mode
0 Lead edge stop (Default)
1 Real time process (All areas)
Code number Image process mode
1 Error diffusion process (Default)
2 Dither process
Default:
2
Default:
0
Default:
1
[07]SIMULATIONS.fm 33 ページ ２００４年１１月１７日 水曜日 午後１２時１１分