Sharp AR-6020 Скачать руководство пользователя страница 95

Страница: 95 / 139

SETTING THE IP ADDRESS OF THE
MACHINE BY SYSTEM SETTINGS

To set the IP address of the machine, perform the program number (37) in the system settings

(p.91)

ENABLING/DISABLING DHCP

Use this setting to have the IP address obtained automatically using DHCP (Dynamic Host Configuration Protocol).
When this setting is enabled, it is not necessary to manually enter an IP address.

Press the [ZOOM] key (

SETTING THE IP ADDRESS AUTOMATICALLY

When the DHCP is set to on, set IP address of the machine by the following operation.

Turn the machine power off and then
back on.

The IP address of the machine will be detected
and set.

When the ZOOM indicator is lit:

DHCP is enabled.

When the ZOOM indicator is off:

DHCP is disabled.

• Every press of [ZOOM] key (

)

switches enabling and disabling of DHCP.

• DHCP is enabled by the factory default.

Note

If DHCP is used, the IP address assigned to
the machine may change automatically.
If the IP address changes, printing will not
be possible.

Note

Содержание AR-6020












































































































































Результаты поиска

Содержание AR-6020

Отзывы:

Похожие инструкции для AR-6020

Бренды по названию

Популярные бренды

Sharp AR-6020, Руководство по эксплуатации

Результаты поиска

Содержание AR-6020

Отзывы:

Похожие инструкции для AR-6020

Бренды по названию

Популярные бренды