SGMW Baojun 530, Сервисное и эксплуатационное руководство пользователя

Страница: 161 / 215

Driving and Controls 153
8
Dr
iv
ing
an
d Co
ntrol
s
11. Install all wheel nuts and tighten them preliminarily.
12. Rotate the jack rocker counterclockwise to lower the
vehicle to the ground stably.
13. Tighten the wheel nuts in the order 1-4-2-5-3 as
shown in the figure above with the torque of 100~130
N·m.
14. Put the leaky tire in the spare tire storage location and
secure it properly. Put tools back to the tool kit and
secure them.
Caution
Make sure to use appropriate nuts and bolts, and
tighten to the proper torque.
The use of incorrect parts or improper tightening of
vehicle nuts may cause damage to the vehicle or
wheel falling off.
Caution
During the entire process the vehicle being lifted by
the jack, ensure that the jack is placed vertically and
no slipping occurs.
Note
Do not lift the vehicle to a height that exceeds the
necessary height for wheel replacement.
Note
Please replace the leaky tire as far as possible for
further use. It shall check the spare tires regularly to
ensure that they can be used safely in case of
emergency.
Caution
Do not work under the vehicle or start the engine when
the vehicle is supported by a jack. The vehicle may slip
off the jack, resulting in serious injury or death.
Note
When the vehicle jacking condition is unsatisfactory
or if you do not have the confidence to safely complete
this work, please contact the Aftersales Service Center
for help.
Caution
Do not apply oil or grease on the wheel nuts or bolts.
Please use correct wheel nuts or bolts.
Use a socket wrench to tighten nuts or bolts firmly.
Please go to the Aftersales Service Center as soon as
possible and tighten wheel nuts or bolts according to
specification. In case of improper tightening, nuts or
bolts may be loose, resulting in accidents.