152 Vehicle Service & Maintenance
Tire Replacement
1.
Take out tools, the jack and spare tire. Check and
confirm that the tire on the diagonal is secured with
blocks or stones.
2.
Use a socket spanner to unscrew the wheel nut by
one turn.
3.
Place the jack just below the lifting point closest to the
tire that needs to be replaced. Align the slot on the
jack head with the edgefold.
Caution
Do not remove any nut before wheels are lifted off the
ground.
Warning
Do not attempt to lift the vehicle before the jack is put
into a proper position. The jack should be firmly
secured between the vehicle and the ground.
4.
As shown in the figure above, connect the jack rocker
to the jack.
5.
Rotate the rocker clockwise to allow the jack to rise
slowly and ensure that the jack head is firmly pushed
into the lifting position.
6.
After ensuring that the jack is in the correct position,
continue turning the rocker until the tire is about 3 cm
off the ground.
7.
Place the spare tire at the vehicle bottom near the
wheel to be replaced so as to prevent the vehicle from
suddenly slipping.
8.
Remove wheel nuts completely.
9.
Remove the wheel to be replaced.
10.
Install the spare tire on wheel hub.
Содержание Baojun 530
