Driving and Controls 115
8
Dr
iv
ing
an
d Co
ntrol
s
Insufficient battery of the remote key may cause the
system to fail to search for the key and thus the engine
fails to start. In this case, you can firstly depress the
clutch pedal, and at the same time attach the side of
remote key with the Baojun emblem close to the
ENGINE START STOP switch. When the green
indicator on the ENGINE START STOP switch
illuminates, press the switch to start the engine.
Please try again if you fail. You shall replace the
battery of the remote key.
2.
Emergency flameout
If emergency flameout of the engine is required when the
vehicle is running, you can long press the ENGINE START
STOP switch for 2s or continuously press for 3 times within
3s.
Caution
Never have a kid operate the ENGINE START STOP
switch in any case; otherwise unexpected start or
flameout of the vehicle, and the vehicle damage and
the casualty accident may be caused.
Caution
Never operate the ENGINE START STOP switch when
the vehicle is running. Accidental vehicle flameout
may suspend braking and assistance of the steering
system. In this case, the driver will lose control of the
vehicle and thus the vehicle damage and the casualty
accident may be caused.
Cruise Control System *
Type I Switch
Type II Switch
As the switch of cruise control system is at the steering
wheel, when the cruise control system is started, the vehicle
can run at such speed. Depress the brake pedal, and the
function will be immediately disabled. Except that the brake
pedal is used to disable the function, operating switches
such as parking brake switch and clutch switch can also be
used to disable the function of the cruise control system.
The system can be used at 3, 4, 5 and 6 gears with the
speed range of 40 Km/h - 120 Km/h when the engine speed
is lower than 4800 rpm. For the AT model, the minimum
speed for starting the cruise control system is 48 Km/h.
Specific application method:
First Step: Cruise Start
Based on the cruise control system switch type, press the “
” button or pull the toggle button towards “ ” direction,
and then the cruise indicator on the instrument cluster starts
flickering, indicating that the cruise control system enters
the activated state; pull the toggle button towards the “SET/-
” direction, and the cruise start succeeds and the cruise
indicator of instrument is normally on. (For example, when
the driver intends to stabilize the speed at 100 km/h, the
driver must firstly speed up to 100 km/h. When the speed
reaches 100 km/h, he/she shall press the “ ” toggle button
and then pull the toggle button towards the “SET/-” direction.
At this time, release the accelerator pedal, and the vehicle
will continuously run at the speed of 100 km/h). After setting
the cruising speed, you can also use the accelerator pedal
to accelerate in the normal method; after the accelerator
pedal is released, the system will recover the speed to the
original cruising speed.
Содержание Baojun 530
